924Board.org

[KBIZ]

Well hello 924 Board,

I'm Very Excited to say i just bought an 82 924 sadly it only has the 2.0L and it's not in running condition, but i digress i got it for peanuts.

Anyways, what i want to know is, Is there a "default" setting for the CIS, The Previous owner was playing with the adjustment because it wasn't running well in the cold. eventually he ran out of time he was willing to spend on it due to other projects.

I have a Hayes manual on the way, But im kinda gitty to start tinkering so what i was wondering is if any of the more experienced guys on the board know of any tricks that they would be willing to share, again is there any "default" point i could possibly set it back to to get it running, say remove the the mixture screw and then put it back in X clicks and tighten the idle screw to full and then back off approximately Y degrees

any help is appreciated
_________________
82, 2.0L base 924 project to try to get into racing.
97 tdi jetta 400,000 + km, daily driver
96 golf tdi dead (thank god)
02 GTI APR stg 3 first car,dead(i'd give up a finger to have back)

[leadfoot]

http://www.924.org/techsection/GarageFAQ.htm#tune-up
do this first... otherwise you will be chasing your tail...
Stu
_________________
1981 ROW 924 Turbo -
carbon fiber GT mish mash
LS1 conversion in progress...

[KBIZ]

cheers sir.
_________________
82, 2.0L base 924 project to try to get into racing.
97 tdi jetta 400,000 + km, daily driver
96 golf tdi dead (thank god)
02 GTI APR stg 3 first car,dead(i'd give up a finger to have back)

[924-76]

Welcome to the Board
Where are you in Ontario? I'm in Ottawa
_________________
1976 924 N/A ROW SOLD
1980 931S
1981 931 Part car RIP

[KBIZ]

im way down in mississauga(city attached to toronto if you have never heard of it we get overshadowed often)
_________________
82, 2.0L base 924 project to try to get into racing.
97 tdi jetta 400,000 + km, daily driver
96 golf tdi dead (thank god)
02 GTI APR stg 3 first car,dead(i'd give up a finger to have back)