 |
924Board.org Discussion Forum of 924.org
|
| View previous topic :: View next topic |
| Author |
Message |
Lau Christophersen
Joined: 17 May 2013 Posts: 123 Location: Denmark/Copenhagen
|
Posted: Tue Dec 17, 2013 2:49 am Post subject: WUR problems - i think. |
|
|
I have a 931 euro spec. from 79, it has some problems when you start it, it can idle at 1400-1500 rpms, when you try to drive it, it nearly dies when boost are building up and the car nearly shots down, when you leave it at idle again there is no problem.
When the car warms up, the problem gets worse and in the end it can't even idle anymore and dies.
I have changed all vacuum elbows and vacuum hoses so vacuum leaks should be eliminated.
So now I suspect it is the WUR which makes problems but what is a common problem with the WUR? I have to replace it? clean it or? |
|
| Back to top |
|
 |
ideola

Joined: 01 Oct 2004 Posts: 15550 Location: Spring Lake MI
|
Posted: Tue Dec 17, 2013 7:46 am Post subject: |
|
|
Lau, time for a CIS test to see what's going on with your system and control pressures. Here is a tutorial:
http://www.924board.org/viewtopic.php?t=35734
Hopefully, you're able to find a CIS test kit in your vicinity. I used to carry them, but the supplier was so unreliable, I had to drop them. _________________ erstwhile owner of just about every 924 variant ever made |
|
| Back to top |
|
 |
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|