924Board.org

[ideola]

One more time, with feeling. Same pricing as the last round.

SPECIFICATIONS
Here are the specs:

• M10x1.0 Porsche Rod Bolt
  
• As per sample
  
• ARP2000 material, 220 ksi
  
• Lead time: 8 weeks (from approval of order)

PRICING

• 80 pieces (10 sets) or more: $209.84 per set ($26.23 per piece)
  
• 40 pieces (5 sets) minimum: $324.88 per set ($40.61 per piece)

Note: This does not include shipping, and ARP will NOT drop ship, so I'll have to have them shipped to me, and then ship them outbound from there.

We need a minimum of 5 participants, otherwise it's a no-go. I am WAAAY too busy with my day job right now to spend very much time baby sitting this, so I'm not going to mess around with extending the cut off dates.

Please post interest here, and then immediately send me a PM with your email so I can send out an invoice. Cut off date for getting in on the buy is two weeks from today, Tuesday 21 February. I will need payment in full by then to proceed. If we don't have five commits by then, the buy is off, in which case I will promptly issue full refunds.

Ready.
Set.
Go.
_________________
erstwhile owner of just about every 924 variant ever made

[Brian Bailey]

Please put me down for a set of 8 bolts, SVP. Can't recall if nuts are involved (well, the ones that fit the bolts, that is...) Will email.
B

[ideola]

Nuts are NOT included. Plan to re-use your existing ones.
_________________
erstwhile owner of just about every 924 variant ever made

[Rasta Monsta]

Can't convince EBS to stock these damn things, eh?
_________________
Toofah King Bad

• WeiBe (1987 924S 2.5t) - 931 S3

[ideola]

Well, sort of. They have participated the last couple of times but will only buy like 2 or 3 sets, and only after we get to the 10 set price point. So I still have to get a commit for 5 sets, then I might be able to get them to pony up for a few more sets. The last couple of times, I've put my own money in up front to get to 10 sets. Which is OK in the long run, because I eventually sell the extra sets, but I just don't have a big pile of cash sitting around to tie up in inventory that might not sell for 6 months. Probably the same thing that Jon Freismidl is thinking
_________________
erstwhile owner of just about every 924 variant ever made

[Fifty50Plus]

Dan,
Put me down for another set. You got my e-mail.
Chuck
_________________
1979 924 NA race car H-Prod SCCA
1982 924 NA race car - Sold
1981 924 Turbo sold
1982 924 Turbo sold
1972 911 E race car - traded for Cayenne Diesel
1975 914 1.8 Building for H-Prod SCCA

[ideola]

I have three confirmed participants. Need two more at minimum.
_________________
erstwhile owner of just about every 924 variant ever made

[lordam]

Put me down for a set. TIA for organising the buy.
_________________
1981 931 ROW RHD Australian delivery, Bilsteins, LSD, adj coilovers, #350/550lb/in front, 27mm TB, adj rear sway bar, Targa setup

[ideola]

We have four committed now, need one more to ensure the group buy.
_________________
erstwhile owner of just about every 924 variant ever made

[MillsMotorsport]

Hi,

Put me down for a set, but only at the "10 set" price, otherwise I will just buy a set of the Crower rods.

Thanks.

[ideola]

Will do.
_________________
erstwhile owner of just about every 924 variant ever made

[Fifty50Plus]

Guys, I just took apart my Benz race motor in which a stock rod bolt broke (BIG hole in block ). I started using ARP rod bolts in the 911 race motors years ago because factory bolts had a tendency to break above 7500 RPM.
These ARP bolts are trick. Lets get some more orders in to get the better price and save some motors.
Chuck
_________________
1979 924 NA race car H-Prod SCCA
1982 924 NA race car - Sold
1981 924 Turbo sold
1982 924 Turbo sold
1972 911 E race car - traded for Cayenne Diesel
1975 914 1.8 Building for H-Prod SCCA

[ideola]

Bump.
_________________
erstwhile owner of just about every 924 variant ever made

[kingzetts]

Hi Dan,
I will take a set of 8 bolts, please. PM on its way.
John Scott
_________________
John,
1980 924 turbo "timewarp" being restored

[WEASEL149]

If it's a go at the 10 set price then put me down for a set please Dan.
_________________
1979 UK 932