924Board.org

morghen · Joined: 21 Jan 2005 Posts: 9095 Location: Romania

Does anyone know the part number for this bushing? this is the bushing that has been mashing my syncros...

_________________
Supercharger and EFI kits
https://www.the924.com

Rob the plumber · Joined: 25 Aug 2008 Posts: 122 Location: Utica, Michigan

That bushing is also making my shifter sloppy. Crazy sloppy.
_________________
1981 931

wombat · Posted: Wed Oct 01, 2008 6:30 pm Post subject:

no, the best I can do from either of my PETS (both sightly different) is what it says 18 is in yours Intemidate shift leaver Part# 477 711 103 (B or C) OR 944 424 013 02
_________________
1977 924 2.0 Auto

Viking · Joined: 30 Jan 2003 Posts: 107 Location: Oslo, Norway

Back in 2002 when I wanted to replace that bushing, my Porsche dealer told me that the intermediate shift lever is only available as a complete part (parts 18-30). It's not exactly cheap, though.

So your choice is either to have it made by a competent fried or shop, buy the whole thing, or pray to Ferdinand in heaven that Porsche now has the bushing available seperately, or that they fleeced me for money.

morghen · Joined: 21 Jan 2005 Posts: 9095 Location: Romania

nah....i'll just have it made from a similar if not identical material.
I'll get my measure tool and get about making a good execution drawing for that part.

I'm going to check if i can make more for you guys too but i cant prommise anything.
_________________
Supercharger and EFI kits
https://www.the924.com