View previous topic :: View next topic |
Author |
Message |
MikeJinCO
Joined: 08 Jun 2010 Posts: 1240 Location: Maysville, Colorado
|
Posted: Wed Oct 30, 2024 4:00 am Post subject: Shop Clean Out |
|
|
I have the following parts that I need to be rid of and hate to throw away. As I'm getting older and do not have any more 924's.
1. 3 ea the large rear approx 170 mm rear motor seals -new
2. External fuel pump with filter
3. One plastic heater hose adapter
4. A set of 1978 A arms that have the sway bar adapter earlier ones don't
5. A pair of Good Audi Transmissions hangers
6. 2ea NOS clutch cables for NA do not know if the fit 931
7 An appears never use Bosch Distributor #237-003-008
8. 1 NOS rubber tail pipe hanger-- -GONE
9. A pair of Weltmeister A arm rear bushings, Taken off because I found some harder ones
10 A pair of KYB front shocks, probably not more than 200 miles use.
Terms are $3 plus shipping per package If you want any pictues plese send me a PM.
I also have a 931 head complete less cam, but it would be $200 plus shipping _________________ Mike
'67 MG Midget Dp
'71 Ocelot Dsr Kawasaki 1000(under rebuild)
Last edited by MikeJinCO on Wed Nov 06, 2024 3:40 am; edited 1 time in total |
|
Back to top |
|
|
MikeJinCO
Joined: 08 Jun 2010 Posts: 1240 Location: Maysville, Colorado
|
Posted: Tue Nov 05, 2024 11:23 pm Post subject: |
|
|
I found 5 931 screw in plastic fuel injector bushings with 3 injector in unknown condition. to add to the list. In another week or two all this is going in the trash. _________________ Mike
'67 MG Midget Dp
'71 Ocelot Dsr Kawasaki 1000(under rebuild) |
|
Back to top |
|
|
barnwerks
Joined: 28 Oct 2022 Posts: 29 Location: Northeast and southeast US
|
Posted: Wed Nov 06, 2024 12:04 am Post subject: |
|
|
Hey Mike, I could use the cylinder head if you have an economical way to ship to 01773. If not, would you sell me the valves from it? |
|
Back to top |
|
|
|