Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Rear backrest push button

 
Post new topic   Reply to topic    924Board.org Forum Index -> Body and Interior
View previous topic :: View next topic  
Author Message
mike924s  



Joined: 08 Feb 2022
Posts: 4
Location: Sweden

PostPosted: Thu Feb 10, 2022 5:40 am    Post subject: Rear backrest push button Reply with quote

How do you remove the rear backrest push button and cover on 924S? Need to remove them for new upholstery.
Back to top
View user's profile Send private message
Eliza  



Joined: 17 Aug 2015
Posts: 174
Location: Prov. Utrecht, The Netherlands

PostPosted: Thu Feb 10, 2022 5:46 pm    Post subject: Reply with quote

The button, if I remember correctly, just turns and unscrews. There's a spring below it.

Once removed, try to prise the cover off from the hole where the button sat ( if this makes sense ). You'll see what I mean.

Eliza
_________________
1985 924 NA RoW
1981 931 S2 RoW
Back to top
View user's profile Send private message
mike924s  



Joined: 08 Feb 2022
Posts: 4
Location: Sweden

PostPosted: Thu Feb 10, 2022 10:20 pm    Post subject: Reply with quote

Thanks, I will try that and hope it works!
Back to top
View user's profile Send private message
Topls82  



Joined: 08 Feb 2021
Posts: 57
Location: Chicago

PostPosted: Sun Dec 25, 2022 1:07 am    Post subject: Seat knob Reply with quote

Just went thru this…
The cone shaped housing/ liner is below the knob & rubber spacer
The housing has small tabs which keeps it in place and cannot be just pulled out…must compress the tabs and can only get access by removing the metal plate (4 small bolts under the glued fiber pad ) then pry back enough to get at the bottom tabs , squeeze with needle nose and push hard ….eventually will push thru . Insert new , requiring even pressure .
Reassemble
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Body and Interior All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group