Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Race cam

 
Post new topic   Reply to topic    924Board.org Forum Index -> 924 Racing Today
View previous topic :: View next topic  
Author Message
james911996  



Joined: 06 Jan 2022
Posts: 11
Location: UK

PostPosted: Sat Jun 18, 2022 2:16 am    Post subject: Race cam Reply with quote

Hi Guys,

Anyone know where i can buy a 924 2.0 NA race cam on short notice?
Not much available here in the UK as Newman is out of blanks and Piper is limited to their "fast road" only.
Anything off the shelf in the US/ EU that wouldn't be cost prohibitive to import?

thanks!
Back to top
View user's profile Send private message
Fifty50Plus  



Joined: 28 Feb 2008
Posts: 1279
Location: Washington DC area

PostPosted: Sat Jun 18, 2022 3:38 am    Post subject: Reply with quote

Elgin recently cut some SCCA H Production cams for us but we had to send him our stock 924 cams to be trimmed down.
_________________
1979 924 NA race car
1982 924 NA race car - Sold
1982 924 Turbo almost a PoS
1981 924 Turbo a real PoS, new engine
1982 924 Turbo nice body, blown engine
1972 911 E race car - going to Vintage
Various 944s to become IT-S race car
Back to top
View user's profile Send private message
kondzi  



Joined: 02 Jul 2018
Posts: 262
Location: Poland/EU

PostPosted: Sat Jun 18, 2022 7:44 am    Post subject: Reply with quote

Try Schrick Camshaft or ask Swiatek (http://www.swiatek.com.pl/home)
_________________
---
Konrad
'89 951 US
'88 Mustang 5.0 LX Convertible (factory specs)
'84 911 Carrera 3.2 RoW (factory specs)
'81 931 RoW (TBD)
'81 Ford Capri 2.8i (factory specs)
'79 Ford Capri 2.9 (heavily modded)
Back to top
View user's profile Send private message
james911996  



Joined: 06 Jan 2022
Posts: 11
Location: UK

PostPosted: Sat Jun 18, 2022 9:19 pm    Post subject: Reply with quote

thank you, will check those out.
Back to top
View user's profile Send private message
Cedric  



Joined: 27 Aug 2004
Posts: 2360
Location: Sweden

PostPosted: Sat Jun 18, 2022 9:55 pm    Post subject: Reply with quote

kmcams.com in norway have cams and some valve train stuff, also ENEM here in sweden have done 924 camshafts in the past in all kinds of grinds up to some really wild stuff, Mittelmotor seems to sell them aswell with several flavours. Im not sure who acutally can get them out quick enough, and all of them are more expensive than newman for sure. How about CatCams?
_________________
1980 924 Turbo
Back to top
View user's profile Send private message MSN Messenger
daniel  



Joined: 18 Jun 2009
Posts: 639
Location: Sydney, Australia

PostPosted: Thu Jun 23, 2022 12:02 pm    Post subject: Reply with quote

I have a hot cam just removed from a motor in good condition that I am looking to sell. specs according to the sheet are:
Intake opens 30 BTDC closes 70 ABDC lift 0.451
Exhaust opens 70 BBDC Closes 30 ATDC lift 0.451

I also have a new set of lifters in box that use the adjustment screws.

These parts are available now ex Australia
_________________
Over the top of skyline, total brake failure.... hit the wall at over 200 kp/h at the dipper, so anyone who has to brake for the esses is a pussy.
1977.5 Race Car, CAMS Group S Spec
1989 944 Cabriolet
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> 924 Racing Today All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group