View previous topic :: View next topic |
Author |
Message |
Liebak
Joined: 25 Dec 2016 Posts: 3 Location: Norway
|
Posted: Sun Jan 01, 2017 9:39 pm Post subject: vw ABF in my 82 924 |
|
|
Hello.
My project:
1982 924 NA
2L vw ABF (Golf 3 GTI 16v)
ITB from hayabusa 05.
MS engine management system.
The car is my daily driver so i try to do as much as possible before i remove the stock engine.
These days i work on the new bellhouse, its the housing form a audi 80 2wd gearbox. Hope someone can help me do some measurements.
+ Diameter of the tip ?
Daniel.
NORWAY |
|
Back to top |
|
|
Liebak
Joined: 25 Dec 2016 Posts: 3 Location: Norway
|
Posted: Thu Jan 05, 2017 6:56 pm Post subject: |
|
|
Can someone please take these measurements? please! |
|
Back to top |
|
|
Horizonblue
Joined: 13 Oct 2011 Posts: 307 Location: Sorring city, Denmark, Europe
|
Posted: Mon Jan 09, 2017 4:22 am Post subject: |
|
|
Hello Norway, Denmark here
Interesting project.
The two lengths on your picture are 28 and 69 mm, while the diameter of the tip is 15 mm.
At least that's how it is on a torque tube I have in the workshop, from a 1976 car. _________________ Euro 924, 1976
"If you can't fix it, don't break it"
/P.G. Andersen |
|
Back to top |
|
|
Liebak
Joined: 25 Dec 2016 Posts: 3 Location: Norway
|
Posted: Mon Jan 09, 2017 8:58 pm Post subject: |
|
|
Thank you so much! some say there is a difference before and after 79/80. I dont know... |
|
Back to top |
|
|
|