924Board.org

thanks for the info. I will look them up on monday.

I want to install new rod bearings, are the rod bolts torque yield? I just purchased new bearings and realized maybe the rod bolts need replaced. Is it really need? I am doing this job with the engine ...

Ok guys, I will check the fule pumps, infact the external is new 4 Months, but hey anything can happen. The retard wire is good and well connected. I don't have a spare ditc, might have to buy a good ...

Checked all hoses, replaced what need to. I hooked up a timing light and started the car. Timing is good till it reaches normal temp, then it retards. BTW the car is a 1981. it has new gas, plugs cap, ...

Thanks All, wish you were all here and having a beer with me as I do all that has been suggested.

I'll check the voltage. I thought about a plugged exhaust, started the car tonight just idled the c ...

Thanks for the response, I'll check all. The car has New gas. I replaced the exhaust manifold 10K ago, while doing that redone all the vac hoses, put a 1 Bar spring in the wastegate with new diagphram ...

My car ran great, I parked it at the end of September. Went to start it this weekend ran great, until I was ready to go for a drive. The temp gauge showed that all was normal, pulled out and lost powe ...

The cones are victims of my quest to know the limits of my car and my driving technque. Safer than light posts, other vehicles and people.

I usually push to the extreme in the 1st two runs to see w ...

Thanks for the info. I'll try the setup. Next race Aug 17.
some pics of the car.

http://www.autosportsnorthwest.org/albums/2003event2/DSCF0018.sized.jpg

http://www.autosportsnorthwest.org/album ...

Yes that is a passenger, we have fun runs aftr each event. It brings more people out to the autocross and we charge $1 for each run.

Back to the handling, the tire pressures were recomended to me. ...

do you find more oversteer or more nutral steering? I have 23's in front and 14's in the rear, with the Victoracers 225/50/15 set at 38psi front and 30 in the rear, my car seems to have understeer go ...

Thanks for the link. Anybody out there try these bars on a 931? What do the guys on the road course use?

I thought about an IC but really it has more than enough power unless there is a quick bolt on out there other than the 937 type which is very rare and expensive. I posted in the "part wanted" hoping ...

I have been a big fan of this site and learned to this here a few years ago.
In fact I have just rebuilt the engine and head, also put a new waste gate diaphram and 1 bar spring, on my 81 931 this sp ...

I'm trying to improve the handling of my car. I have been autocrossing the car for the last year and won the E stock class for the 2002 season. This season my 81 turbo has been lowered in the rear , w ...