924Board.org

As above, its park brake and the little sensor under your handbrake is a tad loose/out of adjustment..

Just look down where the handbrake is and you will see its held in place with a 13mm (1/2" ...

Its the 2.0 924, the power wiring is dead simple, +12v, ground and gauge, it must have somehow shorted inside the gauge, I agree it would be strange that welding on the car caused this, but the alarm ...

I had the same issue with mine(after I did some welding by the way)My meter would peg and stay there.If I turned of the car and tapped the gauge it would go to 0 I took the wire off the sender and tri ...

Hey buddy..

Gave that a try, no matter what the gauge pegs, tried doing the above with no luck, fair to say the gauge is shot i guess?

Cheers

Hmmm Weird, disconnected the G terminal from the sender, still pegged, so removed the wires from the gauge to pass a new one, oh what? STILL PEGGED.

So with the +12v connected to the + on the gauge ...

Sweet garage!!!

What rims u got there on the orange 951? Details please!

The look sweet!

Yeyo,

Would gunking up cause it to max out to full on gauge though? The car has not really done too many miles since it got back on the road, I would say about 600 max since the oil sender was fitt ...

The title pretty much describes it all..

When I flick the ignition on the oil pressure gauge pegs to max (10bar+).

So the idiot light does work properly and the gauge is connected to the G outpu ...

Ok im getting somewhere with this but need some help finishing this off,

Ign on which will be the first switch is done by connecting 30-15. The starter switch which will be the push button switch i ...

Hey guys,

So my ignition switch is dead, im planning to replace the entire switch with a button in place of the factory switch. Obv I would need 1 switch for accessories/pumps ect (first click) and ...

Hey Guys,

As you have probably realized by all my moaning about parts, there is no Porsche parts store on the island.. What other makes/models use the same oil filler cap as the 924?

The seal in ...

Sorry for the bump, sigh, I see why hard rubber was superceeded..

Ozzie, which model/year Toyota 4x4 suspension bushings did you use? Ill be picking some up tomorrow from the local Toyota dealer : ...

Ok done

The upper alternator mount has 2 sleeves and a rubber that slips over them. The rubbers had both perished and fallen out, part number for future reference of the rubbers is: 059 903 263 ...

Hey guys,

Need help identifiying a part

The top bolt on the alternator goes through the 2 brackets mounted onto the block. On those 2 brackets there are metal sleeves with what im guessing us ...

Much respect emoore! Well done!!

You make us proud!