924Board.org

I just saw that yesterday Steve

Jacob texted me

Are you out of the game totally or just letting this one go?

Out of the game if this sells

Then what?

Did a general announcement video on YT about the EFI:
https://youtu.be/NE7Nglcz0ao?si=nEXsmo8HAp-4R6D_

Started a series of technical publications that will support the EFI installation with the TB ...

Had a listen, it sounds like its missfiring.
Mine had a similar thing, turned out to be a bad ignition lead.
Do what Vaughan said, with the engine running pull one spark plug lead at a time and try ...

Audi 80 steel wheel.

Your problem is in plain sight.
All plugs should look the same, if one isnt it means there is something different and likely wrong with that cylinder.
It could be that the cyl2 injector is stuck and ...

They are both keyed in, but have some tolerance...worst case you are half a tooth off...would not cause your issues.

Lets see how those plugs look, and when did you change the ignition plugs/leads/ ...

Take out the spark plugs and take pictures of them, make sure to know which came from which cyl.

Next step is to pre-order a plug-in, bolt-on EFI kit from me.
Also a supercharger kit while you are there.

Ordered most mechanical parts for the first kit, already have all sensors and ecu.
Plug-in wiring loom needs finishing and then testing, driving, tuning.
I’d say it will be under testing by the en ...

A friend’s 924SC does something similar, cant point out why exactly but i think the gearbox mounts are dead on it.

Drop me a line if/when you want a supercharger or efi kit for that 924

Yes, appreciate the thought, in the kit there will be a liquid gasket that needs to be applied lightly to make a perfect seal.

I took the original plastic ones out with a chisel as they were fused ...

Define jerks...ro better describe whats happening...i could also understand that the engine hesitates from your description.

You could have bad engine mounts (the one under the exhaust can have a b ...

First injector adapters in hand.
https://live.staticflickr.com/65535/53168389312_c235eb6c2d_b.jpg

Yes the interior is chocolate brown.

First advice is: if it runs, dont touch it.

I'm rebuilding my engine as it was worn out in every way possible.
If you are replacing pistons, bearings, camshaft, bolts, seals and misc parts ...