924Board.org

I removed rhe pulley in preparation for a teardown, I was planning in doing the front seal and everything. But then encountered the dreaded crank bolt as turns out. I didnt know about how hard this wa ...

I have a 48k mile original 78 and it is very original, still has original shocks, no aftermarket parts, glass strut had 1977 date sticker on it. Still has original stickers here and there that haven't ...

Thanks. One of the belts, that look original says 9.5 x 771

http://forums.pelicanparts.com/uploads26/2025_02_01_15_12_371739496291.jpg

and the other one, that looks like it has been replaced? re ...

I am having the toughest time finding the correct part numbers for these belts.

I'm about to change the water pump and timing belt on my 1978 and it only has 46k miles and a lot of the parts on it ...

Interesting. It's referred to as a "fuel filter" in PET, but that 90 degree angle does make it seem like it would be for flow or something. I'll just clean out the one I have and try to get ...

thanks. I'll clean it out and work on sourcing some from europe

16 years later and I am in the same predicament. I have a 78 and I think I should replace this filter. When I shake it, tiny little black bits come out. Assuming that's not good... If they come out wh ...

I am replacing a some of the fuel system on my 78 that has been sitting for a while. Drained the fuel tank and the fuel was brown.

from the fuel tank there is a short hose, that goes into this VDO ...

Very old thread i know, but these are old cars

I'm in the process or replacing this myself... What did you end up doing here?

There's mention and schematics of the compressor in the 76-79 PET so it seems it was partially an option from factory?

Is it the same "cool" system?

My 78 came with a dealer installed AC from Cool Volkswagen Products Corp.

It's currently not working, and I dont know why. The switch in the vents doesn't turn anything on when enabled. And there a ...

Late last night I was looking at some photos from other posts and I saw that the plastic sleeve wasn't where I expect and when I looked at my column I saw it and was able to pull it off.

Was able ...

My 924 has a loose steering column and it appears that its at the steering wheel bearing. It feels very tight and firm and does not move around down at the firewall.

After some reading there seems ...

What's the general thought amongs you guys here? What "should" these cars be worth and what would you pay? Is Hagerty a good indicator? I still think these and the 944's are undervalued stil ...