924Board.org

not positive the pump is working, but this is its maiden voyage. do they fail right of the bat very often?

was just discussing filling the radiator up from the bleed valve with a friend, i don't f ...

yep, it does. i put in a standard wahler one. you can hear the little air valve clinking around when you squeeze the lower rad hose without the engine running, i guess letting some fluid pass.

thanks for your response, i've considered that one, of course! but have been avoiding it. Soon may be time to take the plunge and do the foes anyway.

even so, i'd like to understand what exactly i ...

Hello!

I could use some new ideas concerning the cooling system on my '79 N/A...

After getting progressively warmer at idle and city driving over the past few months, I decided to go through th ...

Has anyone heard a time frame from him? It's been about of a month of waiting it seems.

Yeah, that's how I checked the injectors. I've gone as far as looking at the plunger, which seems to be fine. Everything looks super clean. Will look at my CIS book for a good next step.

Thanks fia ...

Bingo! New check valve, good fuel flow as measured at the return line after distributor. Thanks for the tip..

BUT, no fuel out of injectors! Mind if I tack another problem to this thread?

makes sense!

Hey Sean, did you ever figure this out?

I installed the exact setup in my '79 NA (Walbro pump, check valve fitting from old pump, new 608 fitting).

After install there is no fuel flow up to fir ...

I've been looking for vacuum leaks as I go and haven't noticed anything. Suppose I should do some real looking. would it not start because of one? i imagine it would just run rough. maybe the cis is m ...

Got it straightened out: stretched cable! installed spacer, longer life!

thanks, i was nervous.

So, here is the story.

Driving home one night I filled the tank up with gas. Drove the 15 miles home and shut down for the night. Going to work at 8am and 20 degrees F, tried to start, no go. Start ...

Hello all-

I've come into some shifting problems all of a sudden (I think) in my '79 924 NA. As fars as I know, the clutch/trans parts are basically the same on the 931 and '79 924's so I am appea ...