924Board.org

Well next up on the list is to fabricate motor mounts. really not hard at all if you have a welder and a angle grinder with a cut off wheel.
I suppose you could leave the old mounts there but I ...

Okay, adding a few details to my first post.
There are (3) bolt locations that go through the adapter plate and into the engine block that interfere with the bell housing. (see photo below)
https: ...

https://live.staticflickr.com/65535/53580533464_3bbb753192_z.jpghttps://live.staticflickr.com/65535/53579347362_f78e422960_z.jpghttps://live.staticflickr.com/65535/53604865011_ac302c7ffb.jpghttps://li ...

So I just decided to go with Flicker. Best choice? Not sure but if I can figure it out then it works for me, I'm not the most computer literate person out there.
I think I've got it figured out!
...

I used a spot weld drill bit that I picked up at Harbor Freight and a few battery packs in my cordless drill to pull one at the local U-Pull salvage yard.

There's some behind the bumper and a coupl ...

At one time there was a lot of speed equipment for the pinto engine, not sure if thats still the case. I wonder if it would fit without cutting a big hole in the hood. Both engines would require lot ...

Yes I know this is not 924 material but I wished we had this kind of documentation on the 924. Maybe someone will share info that I am unaware of.

Saw this on you tube, Porsche rushed to get th ...

Want to post some pictures and need to choose photo hosting website. I had an old flicker account that I can't get into but before trying to set up a new account I thought I would ask the people smar ...

http://www.lobb.ltd/vw-audi-18t-to-porsche-944-engine-conversion/

Hey Rasta, bring me back a case of Fosters! Isn't that Khals favorite! lol

Straight but neglected, last licensed in 98.

https://seattle.craigslist.org/skc/pts/d/black-diamond-1980-porsche-924-turbo/7653408027.html

scored a few parts for myself and he is willing to ship ...

I would shy away from brushing on polyester or epoxy resin due to having a hard coating over a relativley frexible sub subserface (think of a hard boiled egg). Plus once you put it on there is no goi ...

Just make sure you guys pay attention to Torque Tube Shaft Size

See here

Good point Mike, the 944, 924s and the 924 turbo share the same drive shaft dia. (25mm)
vs the 76-82 924 that had t ...

Just make sure you guys pay attention to Torque Tube Shaft Size

See here

Good point Mike, the 944, 924s and the 924 turbo share the same drive shaft dia. (25mm)
vs the 76-82 924 that had t ...

I have a 944 torque tube but I don't know its history and I may be performing this task in the future. I recently spotted this thread and its one of the more in depth that I have found.
https://fo ...