Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Need 931 front sway bar body bracket dimensions

 
Post new topic   Reply to topic    924Board.org Forum Index -> Body and Interior
View previous topic :: View next topic  
Author Message
Mikko  



Joined: 02 Jun 2017
Posts: 23
Location: Finland, Helsinki area

PostPosted: Sun Mar 29, 2020 5:01 pm    Post subject: Need 931 front sway bar body bracket dimensions Reply with quote

Hello,

I am fitting a 931 type front sway bar and would need the dimensions for the brackets welded to the front frame/body.

Most helpful would be to know the size and spacing for the bolts and their location, let's say from the beginning of the front frame beam. Height from under the front beam to the flat area for the bolt is also important. Also, if someone has cut those off a scrap body I would also be interested.

Thanks in advance, once again and stay healthy. Us living in Finland are in partial lockdown due to corona... Luckily garage is in the basement and can work from home office

Br, Mikko
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Body and Interior All times are GMT + 11 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group