Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

5 Lug Brake Questions

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
MikeJinCO  



Joined: 08 Jun 2010
Posts: 1228
Location: Maysville, Colorado

PostPosted: Tue Sep 25, 2018 1:16 am    Post subject: 5 Lug Brake Questions Reply with quote

Could someone who has the 5 lug wheel/ discs all around setup look at their car and answer a couple of questions.

1. Is the top hat between the firewall and the booster a flat one with the MC parallel to the ground or the angled one that tilts the MC up in front?

2. Is the booster a 7" or the 9" same as the 944 booster?

Thanks in advance
_________________
Mike


'67 MG Midget Dp
'71 Ocelot Dsr Kawasaki 1000(under rebuild)
Back to top
View user's profile Send private message Visit poster's website
!tom  



Joined: 28 Aug 2006
Posts: 1931
Location: Victoria, BC Canada

PostPosted: Thu Sep 27, 2018 6:09 am    Post subject: Reply with quote

I'm using the M/C and booster from my '78 with 5 lugs with the X brake configuration which works fine.

I believe if you go with a 944 M/C, you need to re-configure your brake lines.
_________________
78 924 NA
5-lug
Back to top
View user's profile Send private message Visit poster's website
MikeJinCO  



Joined: 08 Jun 2010
Posts: 1228
Location: Maysville, Colorado

PostPosted: Thu Sep 27, 2018 8:09 am    Post subject: Reply with quote

I have put in an entire 944 brake system, 944 MC, 9" booster, the angled top hat from the 944, all new brake lines with front/back split. What I'm trying to find out is how the 924's with the factory 5 lug/all disc system were set up. I have had to relocate the throttle cable and bend the throttle lever to clear the 9", booster. The PET is not real clear on this.
_________________
Mike


'67 MG Midget Dp
'71 Ocelot Dsr Kawasaki 1000(under rebuild)
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group