View previous topic :: View next topic |
Author |
Message |
Dutch924-racer
Joined: 23 Jul 2007 Posts: 1076 Location: The Netherlands
|
Posted: Mon Mar 25, 2019 5:41 am Post subject: Clutch pedal not fully coming back 931 |
|
|
My 931 wasn't used for 4 months. The clutch pedal was on the ground. After a few pumps it came back.
While driving it doesn't come back fully, and the clutch slips a bit.
What could it be, just air in the system, or a leaky cilinder ? _________________ 937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller |
|
Back to top |
|
|
Johann
Joined: 07 Aug 2016 Posts: 240 Location: Netherlands
|
Posted: Mon Mar 25, 2019 6:00 pm Post subject: |
|
|
I had this a year or so ago. The slave cylinder was weeping causing the clutch to stay on the floor some times, but if I hooked it with my foot it would pop back up...until it didn’t anymore. After replacing the slave cylinder, I could not get the clutch to come up fully. In the end I found that my master cylinder was also leaking just enough to make it lose pressure. After replacing the master, she is as good as new. |
|
Back to top |
|
|
|