Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

finding few feet of the thin body side molding

 
Post new topic   Reply to topic    924Board.org Forum Index -> 924S Discussions
View previous topic :: View next topic  
Author Message
jbob  



Joined: 09 Feb 2008
Posts: 10
Location: seattle, wa

PostPosted: Tue Aug 23, 2016 4:23 am    Post subject: finding few feet of the thin body side molding Reply with quote

hey guys have a couple pieces of body side molding that are missing on my 924S and was hoping to find a source. are there any cheaper or better options by the foot than just going to the porsche dealer which i assume is more costly and inconvenient.

thanks so much guys
_________________
'87 924S black/black
Back to top
View user's profile Send private message Yahoo Messenger
Rasta Monsta  



Joined: 12 Jul 2006
Posts: 11723
Location: PacNW

PostPosted: Tue Aug 23, 2016 9:06 am    Post subject: Reply with quote

If you don't care about protection any vinyl guy can lay a stripe down. Hand painted for a little more.
_________________
Toofah King Bad
  • WeiBe (1987 924S 2.5t) - 931 S3
Back to top
View user's profile Send private message Visit poster's website
edredas  



Joined: 09 Dec 2004
Posts: 861
Location: Charlotte, NC

PostPosted: Wed Aug 24, 2016 6:23 am    Post subject: Reply with quote

Rasta Monsta wrote:
If you don't care about protection any vinyl guy can lay a stripe down. Hand painted for a little more.


This is what I'm doing on my turbo. I got 36 feet of 1/2" pinstripe from NAPA for under $5.
_________________
'84 944 -White, Brown interior
'84 944 -Red, Automatic
'86 944 -Garnet, Fully loaded, Koni suspension
'87 924S -Red, 300hp 951 swap
'87 924S -Red, Project Car
'88 924S -Red, Daily Driver
Back to top
View user's profile Send private message Send e-mail AIM Address
edredas  



Joined: 09 Dec 2004
Posts: 861
Location: Charlotte, NC

PostPosted: Fri May 05, 2017 12:41 pm    Post subject: Reply with quote

I came across this at pep-boys and thought others might like to try it. This looks to be a very close match to our OEM trim. I was there getting other things but may pick some up to use instead of the pin stripping. The package includes 20 feet for $14.99.




_________________
'84 944 -White, Brown interior
'84 944 -Red, Automatic
'86 944 -Garnet, Fully loaded, Koni suspension
'87 924S -Red, 300hp 951 swap
'87 924S -Red, Project Car
'88 924S -Red, Daily Driver
Back to top
View user's profile Send private message Send e-mail AIM Address
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> 924S Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group