Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Aluminum Fuel Rail Kits.
Goto page 1, 2, 3, 4, 5  Next
 
Post new topic   Reply to topic    924Board.org Forum Index -> Performance Upgrades
View previous topic :: View next topic  
Author Message
Min  



Joined: 04 Nov 2002
Posts: 2368
Location: Vernon, British Columbia, Canada

PostPosted: Sun Aug 03, 2014 9:01 am    Post subject: Aluminum Fuel Rail Kits. Reply with quote

Just trying to judge interest, I am making an Aluminum Fuel Rail kit for 924's this kit will fit 924 na and 924 turbo's without front head breather. I am working on a modified front breather plate that will work with the rail in place. but have not completed that project yet.

It will be about 200 dollars and included 4 cnc machined low profile injector bungs, a fuel rail (smooth, not ridged as the below one is, unless someone wants a ridged rail specifically), the cnc machined fuel rail mount shown in the below pictures and two o-ring boss AN-6 fittings in a silver finish as per below.









Depending on interest these would be available in approximately a month.

Min
_________________
Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting.
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger
Rasta Monsta  



Joined: 12 Jul 2006
Posts: 11355
Location: PacNW

PostPosted: Sun Aug 03, 2014 9:20 am    Post subject: Reply with quote

631 days away! Good god man, what's shakin?
_________________
Toofah King Bad
  • Shaggy (1980 931) - Got Boost?
  • Red (1987 924S) - Pro44/Spec944
  • Weiße Scheiße (1987 924S) - In Progress
Back to top
View user's profile Send private message Visit poster's website
Min  



Joined: 04 Nov 2002
Posts: 2368
Location: Vernon, British Columbia, Canada

PostPosted: Sun Aug 03, 2014 1:39 pm    Post subject: Reply with quote

Rasta Monsta wrote:
631 days away! Good god man, what's shakin?


Not a whole lot, been reading the board, just haven't had anything to post. I built a cnc router, need anything cut?

Min
_________________
Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting.
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger
tyfighter123  



Joined: 19 Jan 2010
Posts: 541
Location: Colorado

PostPosted: Wed Aug 06, 2014 4:56 am    Post subject: Reply with quote

Min, I would be interested in your fuel rail.
_________________
Porsche 924 1977 N/A
Mustang GT/CS 2007
Porsche 924S 1987 (parts car)(cut up and recycled)
Porsche 911S 1976
Porsche 931 1980
Porsche 931 1980 (parts car)
Back to top
View user's profile Send private message MSN Messenger
Shurick  



Joined: 15 May 2005
Posts: 488
Location: Russia, Moscow.

PostPosted: Wed Aug 06, 2014 7:26 am    Post subject: Reply with quote

I'm interested for sure.
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
Back to top
View user's profile Send private message Visit poster's website
CorsePerVita  



Joined: 25 Jul 2008
Posts: 1994
Location: Redmond, Oregon

PostPosted: Thu Aug 07, 2014 12:38 am    Post subject: Reply with quote

Min wrote:
Rasta Monsta wrote:
631 days away! Good god man, what's shakin?


Not a whole lot, been reading the board, just haven't had anything to post. I built a cnc router, need anything cut?

Min


Not gonna lie, I'm pretty jealous of that. That sounds awesome!
_________________
- 1977 Porsche 924 2.0 N/A (Trackday Project)
- 1979 Porsche 924 2.0 N/A (The other daily)
- 1980 Porsche 931 (Daily)
- 1987 Lamborghini Jalpa
- 1999 Ducati 900SS
Back to top
View user's profile Send private message
Min  



Joined: 04 Nov 2002
Posts: 2368
Location: Vernon, British Columbia, Canada

PostPosted: Thu Aug 07, 2014 10:59 am    Post subject: Reply with quote

CorsePerVita wrote:
Not gonna lie, I'm pretty jealous of that. That sounds awesome!


It is. I can cut gasket material up to .250 thick, copper headgaskets can be machined, plastic parts (phenolic spacers for example), intake bits such as flanges etc. I also have a flame attachment so I can cut up to 5-6 inch thick steel plate. It'll do engraving, etc. The only thing I can't really cut with it is stainless steel at the moment, but if I need that done I have other methods available.

Min
_________________
Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting.
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger
Kenodog  



Joined: 25 Jun 2003
Posts: 2452
Location: Vancouver,B.C.

PostPosted: Wed Aug 13, 2014 4:12 am    Post subject: Reply with quote

MIn, I will take a rail and one of the fan shrouds. Let me know when it's done and I will come and pick it up.

Leigh
_________________
1979 Euro 931, Olive
1981 931, Sabine
2014 Mazda CX-5 (Kid's limo)
2008 GS500
1996 Dodge Caravan (DJV)
Back to top
View user's profile Send private message Send e-mail MSN Messenger
MackTheKnife  



Joined: 22 Jul 2014
Posts: 12
Location: Central Coast NSW Australia

PostPosted: Mon Aug 18, 2014 4:31 pm    Post subject: Reply with quote

I'll take a rail if you can it ship to Australia.
_________________
Paul Mc - Proud owner of:

'80 924 Turbo (ROW)
'12 VW Polo GTI
'00 Mitsubishi Pajero Exceed
Back to top
View user's profile Send private message
Min  



Joined: 04 Nov 2002
Posts: 2368
Location: Vernon, British Columbia, Canada

PostPosted: Tue Aug 19, 2014 11:03 am    Post subject: Reply with quote

Alrighty, I'll start making a run of them for you guys. I can ship anywhere as long as you pay shipping.

Min
_________________
Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting.
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger
tyfighter123  



Joined: 19 Jan 2010
Posts: 541
Location: Colorado

PostPosted: Mon Aug 25, 2014 5:33 am    Post subject: Reply with quote

any news on these?
_________________
Porsche 924 1977 N/A
Mustang GT/CS 2007
Porsche 924S 1987 (parts car)(cut up and recycled)
Porsche 911S 1976
Porsche 931 1980
Porsche 931 1980 (parts car)
Back to top
View user's profile Send private message MSN Messenger
Min  



Joined: 04 Nov 2002
Posts: 2368
Location: Vernon, British Columbia, Canada

PostPosted: Wed Aug 27, 2014 12:36 pm    Post subject: Reply with quote

Yep, I am in the process of getting all the material and cnc machined bits have been ordered, waiting for them to get finished. Will keep you posted.

Min
_________________
Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting.
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger
MackTheKnife  



Joined: 22 Jul 2014
Posts: 12
Location: Central Coast NSW Australia

PostPosted: Thu Aug 28, 2014 12:39 pm    Post subject: Reply with quote

Thanks for this Min!
_________________
Paul Mc - Proud owner of:

'80 924 Turbo (ROW)
'12 VW Polo GTI
'00 Mitsubishi Pajero Exceed
Back to top
View user's profile Send private message
Min  



Joined: 04 Nov 2002
Posts: 2368
Location: Vernon, British Columbia, Canada

PostPosted: Mon Sep 15, 2014 9:51 am    Post subject: Reply with quote

I have received all the bungs I had machined, however I am still waiting on fuel rail material before I can complete these kits. I'll let you know when my material order arrives.

Min
_________________
Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting.
Back to top
View user's profile Send private message Send e-mail AIM Address Yahoo Messenger MSN Messenger
tyfighter123  



Joined: 19 Jan 2010
Posts: 541
Location: Colorado

PostPosted: Tue Oct 28, 2014 7:26 am    Post subject: Reply with quote

Hey Min, Any updates on these?


THanks
_________________
Porsche 924 1977 N/A
Mustang GT/CS 2007
Porsche 924S 1987 (parts car)(cut up and recycled)
Porsche 911S 1976
Porsche 931 1980
Porsche 931 1980 (parts car)
Back to top
View user's profile Send private message MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Performance Upgrades All times are GMT + 11 Hours
Goto page 1, 2, 3, 4, 5  Next
Page 1 of 5

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group