| View previous topic :: View next topic |
| Author |
Message |
Rasta Monsta
Joined: 12 Jul 2006
Posts: 11733
Location: PacNW
|
 Posted: Thu Aug 25, 2011 3:49 am Post subject: Oil Console/Feed Line Sealing Rings |
 |
|
It is slowly dawning on me that the crush washers on my turbo aren't anything magical, and can probably come from a source other than PCNA.
So, to help me grab them from a neighborhood vendor, I need a favor. . .looking for ID and OD of the following rings:
- Cooler lines at console
- Feed line at console
- Center bolt at console
- Feed line fitting at turbo bracket
TIA
rasta
_________________
Toofah King Bad
- WeiBe (1987 924S 2.5t) - 931 S3
|
|
| Back to top |
|
 |
ideola
Joined: 01 Oct 2004
Posts: 15550
Location: Spring Lake MI
|
| Posted: Thu Aug 25, 2011 3:27 pm Post subject: |
|
|
You're about a month late in your request. Have just installed two complete sets of these on the 941 and Club Sport motors. I might have some old ones floating about, but won't be able to check until Saturday.
_________________
erstwhile owner of just about every 924 variant ever made |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
924 FAQ (Technical)
