Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Shurick's 931 build
Goto page Previous  1, 2, 3, 4, 5, 6  Next
 
Post new topic   Reply to topic    924Board.org Forum Index -> Performance Upgrades
View previous topic :: View next topic  
Author Message
Shurick  



Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.

PostPosted: Sun Aug 09, 2015 5:33 am    Post subject: Reply with quote

Fasteddie313 wrote:
That is sick!! great work

At 1.4 Bar/20psi you have to be getting around 300 crank hp you think? Maybe a bit more?

According to fuel/air consumption from EFI datalog it must be 320-330 hp. Don't sure it's safe to run so much boost on a nearly stock engine. Also don't know how it will withstand longer drives. It may (and sure it will) demand higher capacity radiator for longer punishment than a one burst with wrong boost controller settings.
P.S. It's time to update my signature.=)
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/
Back to top
View user's profile Send private message Visit poster's website
Shurick  



Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.

PostPosted: Mon Aug 10, 2015 8:00 pm    Post subject: Reply with quote

Sunday drive @1.2 bar =)
https://youtu.be/v_COurZdFlU
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/
Back to top
View user's profile Send private message Visit poster's website
Shurick  



Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.

PostPosted: Wed Aug 26, 2015 7:41 am    Post subject: Reply with quote

Express G31 overhaul: http://www.youtube.com/watch?v=h5ihSjZad8U
Unfortunately, space on SD card ended up during gearbox disassembling. So it's not covered completely.
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/
Back to top
View user's profile Send private message Visit poster's website
Fasteddie313  



Joined: 29 Sep 2013
Posts: 2596
Location: MI

PostPosted: Wed Aug 26, 2015 9:43 am    Post subject: Reply with quote

Shurick wrote:
Express G31 overhaul: http://www.youtube.com/watch?v=h5ihSjZad8U


Truly awesome..
_________________
80 Turbo - Slightly Modified
Back to top
View user's profile Send private message Yahoo Messenger
morghen  



Joined: 21 Jan 2005
Posts: 8868
Location: Romania

PostPosted: Wed Aug 26, 2015 4:30 pm    Post subject: Reply with quote

nice, what did you replace?
_________________
https://www.the924.com
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger MSN Messenger
Shurick  



Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.

PostPosted: Thu Aug 27, 2015 7:28 am    Post subject: Reply with quote

morghen wrote:
nice, what did you replace?

Retaining pins on the 2-3 gear fork jammed and fell off so I couldn't engage gears.
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/
Back to top
View user's profile Send private message Visit poster's website
kcoyle  



Joined: 15 Jan 2011
Posts: 712
Location: Long Island, NY

PostPosted: Thu Aug 27, 2015 8:15 am    Post subject: Reply with quote

Shurick wrote:
Express G31 overhaul: http://www.youtube.com/watch?v=h5ihSjZad8U


Loved it!
_________________
1982 931- Stock with MBC at 8psi

Relax, all right? My old man is a television repairman, he's got this ultimate set of tools. I can fix it.
Back to top
View user's profile Send private message
Shurick  



Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.

PostPosted: Wed Feb 15, 2017 10:45 pm    Post subject: Reply with quote

Almost forgot to tell a story about my new clutch disk.
Spec stage II disc died very fast for some unknown reasons. So I was looking for some alternative and found it for cheap.
Since I use M31/03 flywheel which shares clutch with 944, I can't use direct replacement like Mitsubishi Delica disc, but I manufactured a kit modify it:






_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/
Back to top
View user's profile Send private message Visit poster's website
Fasteddie313  



Joined: 29 Sep 2013
Posts: 2596
Location: MI

PostPosted: Thu Feb 16, 2017 3:35 am    Post subject: Reply with quote

Shurick wrote:
320-330 hp. Don't sure it's safe to run so much boost on a nearly stock engine. Also don't know how it will withstand longer drives. It may (and sure it will) demand higher capacity radiator for longer punishment than a one burst with wrong boost controller settings.


Holding up well? Other than the clutch..
_________________
80 Turbo - Slightly Modified
Back to top
View user's profile Send private message Yahoo Messenger
peterld  



Joined: 10 Dec 2006
Posts: 946
Location: Noosa Heads QLD Australia

PostPosted: Thu Feb 16, 2017 8:27 pm    Post subject: Reply with quote

Shurick.....so what exactly have you done with the clutch plate?
_________________
80/81 932/8 ROW
Back to top
View user's profile Send private message Send e-mail
morghen  



Joined: 21 Jan 2005
Posts: 8868
Location: Romania

PostPosted: Thu Feb 16, 2017 9:45 pm    Post subject: Reply with quote

Right, share with us the materials used to make yourself a cheap clutch please.
_________________
https://www.the924.com
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger MSN Messenger
Shurick  



Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.

PostPosted: Fri Feb 17, 2017 9:26 pm    Post subject: Reply with quote

Fasteddie313 wrote:
Shurick wrote:
320-330 hp. Don't sure it's safe to run so much boost on a nearly stock engine. Also don't know how it will withstand longer drives. It may (and sure it will) demand higher capacity radiator for longer punishment than a one burst with wrong boost controller settings.


Holding up well? Other than the clutch..

It runs well on 1.1 bar of boost with no issues at all, but I feel it needs larger radiator. Will try to install two-pass aluminium radiator, bigger injectors and bigger oil cooler. And crank up boost to 1.3-1.4 bar.
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/
Back to top
View user's profile Send private message Visit poster's website
Shurick  



Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.

PostPosted: Fri Feb 17, 2017 9:29 pm    Post subject: Reply with quote

peterld wrote:
Shurick.....so what exactly have you done with the clutch plate?


I made a spacer and heat-treated bolts, drilled out the rivets in clutch and installed spacer.
Much like in this thread, but my spacer is reusable and more solid to accept higher torque.
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/
Back to top
View user's profile Send private message Visit poster's website
peterld  



Joined: 10 Dec 2006
Posts: 946
Location: Noosa Heads QLD Australia

PostPosted: Fri Feb 17, 2017 10:37 pm    Post subject: Reply with quote

Yes, I see that...and a very nice job too.
What was the clutch plate from, that you modified? There are no Bronco 11s in Australia, so I'm wondering whether it was a common Euro car.
_________________
80/81 932/8 ROW
Back to top
View user's profile Send private message Send e-mail
Shurick  



Joined: 15 May 2005
Posts: 524
Location: Russia, Moscow.

PostPosted: Sun Feb 19, 2017 12:30 pm    Post subject: Reply with quote

peterld wrote:
Yes, I see that...and a very nice job too.
What was the clutch plate from, that you modified? There are no Bronco 11s in Australia, so I'm wondering whether it was a common Euro car.

It was Mitsubishi Delica diesel clutch plate. I'll post a p/n tomorrow, I need to get back to my home pc to find it. By the way, I can supply the pacer and bolts if you need.
_________________
WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Performance Upgrades All times are GMT + 10 Hours
Goto page Previous  1, 2, 3, 4, 5, 6  Next
Page 5 of 6

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group