924Board.org

Adismo · Joined: 05 Oct 2008 Posts: 80 Location: Guatemala

Please help me, i was cheking the ignition module becouse never work, and the only wire unpluged that my car have is this one

the hayne manual seid that is the yellows wires but doesnt seid where are pluged

Please help me

BTW:sorry my english

Buwani 931 · Joined: 31 May 2004 Posts: 308 Location: Napa California

What year, model?
You can put it in your signature so everyone knows , every post.

Shawn
_________________
1980 931
That's thirty minutes away. I'll be there in ten.

El Chato · Joined: 22 Aug 2006 Posts: 205 Location: El Paso, TX

Hard to say, Im new to the car, but learning quick, try first by specifing the yaar and type, then other members migth look under the hood and aid you mucth easyly, On question where can Iget wire diagrams with full color like yours

Adismo · Joined: 05 Oct 2008 Posts: 80 Location: Guatemala

Adismo · Joined: 05 Oct 2008 Posts: 80 Location: Guatemala

Grenadiers · Posted: Sun Feb 22, 2009 6:48 am Post subject:

Just checked the '77 in the garage, and it plugs into the base of the distributor. Check it out!
_________________
'83 944 Track car.
'88 924S Track car.
'89 944 Turbo
2004 Winnebago Vectra monster RV
2012 Jeep Wrangler
2014 Kia Soul
2001 Ford F350 powerstroke

El Chato · Joined: 22 Aug 2006 Posts: 205 Location: El Paso, TX

thanks, hope you get it fix soon, have you notice any change in the engines performance?

El Chato · Joined: 22 Aug 2006 Posts: 205 Location: El Paso, TX

Color diagrams rock, I think Ill look into remaking one with some of the software going around, makes it mutch more simply to work on, do you guys, I think there has always been a dabate over copyrigth and so on, so If I were to make one and sitributed, would it be alrigth or would go against the forums rules.

Adismo, also check on the haynes, I got that one and also the clymer, Ive notice that some things on one may show on one but not the other, this will help you later.

Adismo · Joined: 05 Oct 2008 Posts: 80 Location: Guatemala

Adismo · Joined: 05 Oct 2008 Posts: 80 Location: Guatemala

Grenadiers · Posted: Sun Feb 22, 2009 8:49 am Post subject:

No pics, but it should attach to the right side of the distributor as you look at it from the front of the car. If all else fails, I'll get a pic of it, but I'm lazy!!
_________________
'83 944 Track car.
'88 924S Track car.
'89 944 Turbo
2004 Winnebago Vectra monster RV
2012 Jeep Wrangler
2014 Kia Soul
2001 Ford F350 powerstroke

Adismo · Joined: 05 Oct 2008 Posts: 80 Location: Guatemala

Adismo · Joined: 05 Oct 2008 Posts: 80 Location: Guatemala

I think that is this but i dont know how to plug it

_________________
Porsche 924 1977 XK Euro

RC · Joined: 25 Mar 2007 Posts: 2637 Location: Australia

No mate, thats just a hole. Obviously missing the pressed in metal cap but no big deal. Perhaps stick some tape or whatever over it to stop crap entering and possibly affecting the advance mech.

That plug inserts in to the black socket with two male pins that is at the top edge of the aluminium casting, just below the cap. Look around behind the dizzy. Can pull and rotate the dizzy for easier access if you know how to retime it. Probably not a good idea for you though.

The plug is polarized, should only fit in one way. If in doubt the right hand side terminal pin at dizzy goes to the grounded side of the connector.

michi924 · Joined: 22 May 2007 Posts: 163 Location: Pontevedra, Spain

Look to the side of the distributor facing to the firewall. There should be a black male plug, check it.
_________________
Porsche 924 NA Euro.