924Board.org

[Dutch924-racer]

Will Sachs struts from a 944 Turbo S2 fit without any problems on my 1979 924 ?

Of course I will use the springs from my 924.
_________________
937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller

[daveo]

same mod on my car, 1979, dont change the springs, stiffer the better i say, fit the full thing & back dampers if you have them. you will have to grinde the hub mount or the strut faces, just a little for them to fit.
if your doing the struts fit the hubs off the s2 5 pin, & go disc all round it all fits with some small mods.
later
dave

[Dutch924-racer]

Are the turbo springs not to high for an 924 2.0 ?
_________________
937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller

[daveo]

dutch
have a look at the photo up top (nasty red car) thats the ride hight i run

[Dutch924-racer]

Hello,

Can you mail me a picture of your car with the 944 turbo springs under it ?

Thanks,

Regards,

Ducth 924 racer
924 board
_________________
937 trackday car
Series 2 engine
951S turbo and intercooler
Fast road camshaft
Forge recirculation valve + boost controller