Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Driver door won't fully close

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
timstar924  



Joined: 04 Jul 2004
Posts: 284

PostPosted: Sat Jul 31, 2004 3:18 pm    Post subject: Driver door won't fully close Reply with quote

My driver door sticks out a bit when closed and i think the stricker doesn' t fully lock in. cus when it is shut and you push on the door it squeeks and mooves in a bit. The passenger door fully locks, when you shut it the door doesn't stick out a bit and you hear the click of it fully locking which doesn't happen on my driver door. My driver door opened once while making a right turn i was lucky it was early morning and there was to traffic. the stricker comes loose and the door doesn't fully lock. I tried to fix it all day today with no luck. I ajusted both the lock on the door and the stricker but it still doesn't fully lock. I don't know what to do anymore. I don't think a mechanic can fix this if i can't . i am going to take it to a shop anyways to see if they can do anything.
Back to top
View user's profile Send private message
Lizard  



Joined: 03 Nov 2002
Posts: 9364
Location: Abbotsford BC. Canada

PostPosted: Sat Jul 31, 2004 3:26 pm    Post subject: Reply with quote

you need to adjust the pole attached to the chassis, however if it is sticking out abit and not fully closing try slamming the door, and I mean hard not light slamming, and make sure that the mechanism in the door is working properly with a screwdriver ie actuating the mechanism as if it were coming into contact with pole on the chassis and making sure that it clicks 2 times,
_________________
3 928s,
Back to top
View user's profile Send private message Send e-mail
timstar924  



Joined: 04 Jul 2004
Posts: 284

PostPosted: Sat Jul 31, 2004 3:51 pm    Post subject: Reply with quote

the mechanism seems to work fine when i push it in it click in two times. i did try adjusting the stricker on teh body but i can't get it to work i tried all day today. i'm going to see if a shop can fix it which i doubt cus i tried so hard. shop will probably say you need a new mechanism or something.
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group