View previous topic :: View next topic |
Author |
Message |
jesse wall
Joined: 09 Nov 2002 Posts: 284 Location: blanch nc
|
Posted: Fri Apr 25, 2003 1:06 pm Post subject: are camber boxes legal ? |
|
|
Are rear camber boxes legal in scca or pca or 944 cup ? thanks Jesse _________________ jesse wall 'new driver' , 87 924s |
|
Back to top |
|
|
924RACR
Joined: 29 Jul 2001 Posts: 8803 Location: Royal Oak, MI, USA
|
Posted: Fri Apr 25, 2003 10:26 pm Post subject: |
|
|
What exactly do you mean by a rear camber box? _________________ Vaughan Scott
Webmeister
'79 924 #77 SCCA H Prod racecar
'82 931 Plat. Silver
#25 Hidari Firefly P2 sports prototype |
|
Back to top |
|
|
John Brown
Joined: 07 Nov 2002 Posts: 903 Location: Leesburg VA
|
Posted: Fri Apr 25, 2003 11:42 pm Post subject: |
|
|
Ask Dave about the cup. But I don't think they would be. If they are not OK for SCCA then you can not enter as an ITS car; and if they are not legal for PCA then you can not enter as an PCA H or I car. So, no.
John |
|
Back to top |
|
|
jjadczak
Joined: 03 Jan 2003 Posts: 346 Location: Accokeek, MD
|
Posted: Tue Apr 29, 2003 4:49 am Post subject: |
|
|
Ditto's, what are you talking about? |
|
Back to top |
|
|
jesse wall
Joined: 09 Nov 2002 Posts: 284 Location: blanch nc
|
Posted: Tue Apr 29, 2003 12:31 pm Post subject: camber box |
|
|
Where the rear control arm fits into the torsion tube a metal box is placed that allows the camber to be changed by tightening bolt after shims are added , this lets you adjust camber without affecting toe and allows more camber,folks sell them for 911 and 930 looks easy enough to weld one up , I think if you were to slot the holes in the torsion carier making inside hole lower and outside [towards wheel] hole higher you could get more camber , the box allows easy adjustment just crawl under car and have buddy tell you when you have enough camber by adding shims . Found this in fixing der porsche ,guys were getting 931 track ready , wanted to know if anyone has had esperiencebuilding one and if it would be legal , think it would be for pca improved anyway may be too much trouble Jesse _________________ jesse wall 'new driver' , 87 924s |
|
Back to top |
|
|
924RACR
Joined: 29 Jul 2001 Posts: 8803 Location: Royal Oak, MI, USA
|
Posted: Tue Apr 29, 2003 9:45 pm Post subject: |
|
|
One more thing, this might aggravate any attempts to install spherical bearings into the rear trailing arms, at least using the commercially available kits. _________________ Vaughan Scott
Webmeister
'79 924 #77 SCCA H Prod racecar
'82 931 Plat. Silver
#25 Hidari Firefly P2 sports prototype |
|
Back to top |
|
|
|