924Board.org

Guest · Posted: Wed Jul 18, 2001 1:48 pm Post subject:

From: James Flynn
Email: Jamezflim@yahoo.com
Date: 18 Jul 2001
Time: 13:48:03

ok guys... I took off the distributor and cant figure out how to get it back on right. i don't have a manual. im assuming there is a mark on the rotor somewhere to line up with the housing? please help me.

Jamez

Guest · Posted: Wed Jul 18, 2001 2:34 pm Post subject:

From: Vaughan
Email: vscott77@nospam.hotmail.com
Date: 18 Jul 2001
Time: 14:34:51

That's what you think!

With the engine at #1 TDC, the rotor will point about to the rear-most bolt on the intake manifold. Just a general pointer to get you in the zone; you'll still need to set the timing properly once you get the engine started.

Good luck...

Vaughan

Guest · Posted: Fri Jul 20, 2001 12:33 am Post subject:

From: Lars
Email: l_porsche@hotmail.com
Date: 20 Jul 2001
Time: 00:33:49

It is a very very small nick, if dirt is in it you might not notice it...feel with your finger nail as a last resort.

They don't even circle it or point to it in haynes. silly haynes.