View previous topic :: View next topic |
Author |
Message |
Joma
Joined: 28 Nov 2016 Posts: 18 Location: Netherlands
|
Posted: Fri Sep 08, 2023 7:48 pm Post subject: proper location of lock carrier |
|
|
Hey everyone
One of the previous owners replaced the whole lock carrier (the piece that holds the radiator and hood latch)
but welded it in the wrong position so my badge panel and radiator aren't situated right.
I looked in the workshop manual and found that Porsche used a welding jig NR: 9117
Well, I don't have said jig.
Does someone have the dimension of where to properly place the lock carrier?
or perhaps the drawings of the welding jig.
Many Thanks
Joma _________________ 924 80 with 931 S2 engine and efi |
|
Back to top |
|
|
Joma
Joined: 28 Nov 2016 Posts: 18 Location: Netherlands
|
Posted: Mon Dec 11, 2023 2:45 am Post subject: |
|
|
Is there anyone who can help me with the dimensions of an original 924 radiator?
the distance between the mounting points from top to bottom, center to center? _________________ 924 80 with 931 S2 engine and efi |
|
Back to top |
|
|
Mclaren924
Joined: 13 Oct 2021 Posts: 172 Location: California
|
Posted: Tue Dec 12, 2023 4:18 am Post subject: |
|
|
Joma wrote: | Is there anyone who can help me with the dimensions of an original 924 radiator?
the distance between the mounting points from top to bottom, center to center? |
Top to bottom is 14 1/4 inches just about and 18 1/2 side to side. _________________ 1980 931 "Salt" Bucket wannabe racer (not started)
1979 924 "Pepper" Restoration (almost done)
1980 924 "Donnie" (Parts car)-DEAD
1977 924 Slicktop "Pennie" Bucket turned Silver Spoon |
|
Back to top |
|
|
Joma
Joined: 28 Nov 2016 Posts: 18 Location: Netherlands
|
Posted: Sun Dec 31, 2023 5:38 am Post subject: |
|
|
welded the lock carrier in place and it looks spot on.
thank you for measuring _________________ 924 80 with 931 S2 engine and efi |
|
Back to top |
|
|
|