Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

AC manifold gauge system question

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
ted von Kampen  



Joined: 14 Oct 2016
Posts: 141
Location: Scottsbluff, Nebraska

PostPosted: Sun Jun 07, 2020 7:03 am    Post subject: AC manifold gauge system question Reply with quote

In a typical gauge set there are Blue and Red couplers that go to the lines and there are hoses that go from the couplers to the guage manifold. I know the difference between Red and Blue systems and they are different coupler sizes so you cannot mix up. However my question is the hoses them selves. If you look at one end of the hose it is just a threaded coupler. The other end seems to have a bent tube that goes to the threaded nut. If you look at one end of the hose (ie-with the bent tubing) there appears to be a valve similar to a schrader tire valve. My question is this: Which end of the hose (schrader valve or open hose end) goes to the coupler and which end goes to the manifold. The set literature does not say. Thanks
Back to top
View user's profile Send private message
Paul  



Joined: 02 Nov 2002
Posts: 9450
Location: Southeast Wisconsin

PostPosted: Sun Jun 07, 2020 11:13 pm    Post subject: Reply with quote


_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.
Back to top
View user's profile Send private message Send e-mail
ted von Kampen  



Joined: 14 Oct 2016
Posts: 141
Location: Scottsbluff, Nebraska

PostPosted: Mon Jun 08, 2020 12:07 am    Post subject: Gauge set pictures Reply with quote

Thanks
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group