924Board.org

Smoothie · Posted: Tue Apr 30, 2019 9:09 am Post subject: SpecialTAuto for rebuilt WURs?

Hey strangers, I'm getting ready to replace my US '82 924T's WUR. Is SpecialTAuto in Texas still the place to go? Any other suppliers out there?
_________________
"..it's made in Germany. You know the Germans always make good stuff."

'82 924T, US version, dark green metallic, 5 speed Audi 016G gearbox

924-76 · Joined: 05 Jun 2006 Posts: 1400 Location: Ontario, Canada

I had my 931 WUR rebuild by those guys: http://www.cisflowtech.com/
I was and still happy with the service and result. It came back looking like new.
_________________
1976 924 N/A ROW SOLD
1980 931S
1981 931 Part car RIP

daniel · Joined: 18 Jun 2009 Posts: 620 Location: Sydney, Australia

I replaced my WUR with a adjustable fuel pressure regulator. Never looked back!
_________________
Over the top of skyline, total brake failure.... hit the wall at over 200 kp/h at the dipper, so anyone who has to brake for the esses is a pussy.
1977.5 Race Car, CAMS Group S Spec
1989 944 Cabriolet

924-76 · Joined: 05 Jun 2006 Posts: 1400 Location: Ontario, Canada

924RACR · Posted: Tue Apr 30, 2019 10:58 pm Post subject:

I got mine rebuilt by Special T last year or the year before, excellent service...
_________________
Vaughan Scott
Webmeister
'79 924 #77 ITB racecar
'82 931 Plat. Silver
#25 Hidari Firefly P2 sports prototype

Kenodog · Joined: 25 Jun 2003 Posts: 2579 Location: Vancouver,B.C.

The last time I used John at Special T it took forever to get back. Then I found out he isn't doing them in house, he sends them to some company in California to have them done. Good enough job but a pain.

The last WUR and metering head I had done I sent to CIS Flowtech and the service and turn time was fantastic. Time will tell if it last and is good internally but so far so good. Not cheap, but what is these days...

Leigh
_________________
1979 Euro 931, Olive
1981 931, Sabine
2014 Mazda CX-5 (Kinderwagon)
2008 GS500
1996 Dodge Caravan (DJV)

Paul · Posted: Wed May 01, 2019 5:30 am Post subject:

Smoothie, welcome back!
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977

Khal · Posted: Wed May 01, 2019 6:41 am Post subject:

I have no salient information, I just wanted to say hello to Smoothie...

Hello, Smoothie!

_________________
'80 924 Turbo

Fifty50Plus · Posted: Wed May 01, 2019 6:50 am Post subject:

Daniel, any update on where to get an adjustable fuel pressure regulator?
_________________
1979 924 NA race car
1982 924 NA race car - Sold
1982 924 Turbo almost a PoS
1981 924 Turbo a real PoS, new engine
1982 924 Turbo nice body, blown engine
1972 911 E race car - going to Vintage
Various 944s to become IT-S race car

Sndtech · Joined: 23 Apr 2013 Posts: 38 Location: Commack, NY

Best job I have had BOTH my fuel distributor AND WUR rebuilt was from Fuel Injection Corp .
They did a much better and faster job than Special T.

They were priced better also. Highly recommend.

Website below..
https://fuelinjectioncorp.com
_________________
Manny-
1977 924 Martini |1979 924 N/A Dolomite Grey | 1980 924 N/A Minerva Blue

Rasta Monsta · Joined: 12 Jul 2006 Posts: 11377 Location: PacNW

Fifty50Plus · Posted: Sat May 04, 2019 12:28 pm Post subject:

Same to Rasta!
_________________
1979 924 NA race car
1982 924 NA race car - Sold
1982 924 Turbo almost a PoS
1981 924 Turbo a real PoS, new engine
1982 924 Turbo nice body, blown engine
1972 911 E race car - going to Vintage
Various 944s to become IT-S race car