Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

unsticking the clutch

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
Cole Thomas  



Joined: 10 Feb 2019
Posts: 16
Location: Vanlue Ohio

PostPosted: Fri Mar 22, 2019 12:59 pm    Post subject: unsticking the clutch Reply with quote

I have a 1982 924 2.0 NA that hasn't been on the road since about 1991. The clutch is fused/rusted to the flywheel. What is the best way to get it unstuck without removing it? thank you for the responses in advance.
_________________
1982 Porsche 924 NA project
Back to top
View user's profile Send private message
safe  



Joined: 18 Mar 2017
Posts: 171
Location: Sweden

PostPosted: Fri Mar 22, 2019 5:59 pm    Post subject: Re: unsticking the clutch Reply with quote

Cole Thomas wrote:
I have a 1982 924 2.0 NA that hasn't been on the road since about 1991. The clutch is fused/rusted to the flywheel. What is the best way to get it unstuck without removing it? thank you for the responses in advance.


Start it with, drive it. While driving press down the clutch pedal and accelerate/decelerate to try and break it free. Do it on a piece of road with little or no traffic...
Back to top
View user's profile Send private message
Ozzie  



Joined: 12 Mar 2005
Posts: 4447
Location: Townsville, Qld. Australia

PostPosted: Mon Mar 25, 2019 9:46 am    Post subject: Reply with quote

Had this problem with the wifes Fiat and the only method that worked was jacking the rear end, start car in gear, depress clutch and hitting the brakes repeatedly.
Basically if you dont want to disassemble it need a jolt or lots of them
_________________
Porsche 924 1984 (UK import) NA
Its AUTO and its BLACK
Montego Black on black/red
Engineer of Electro/Mechanical Systems Maintenance
Back to top
View user's profile Send private message Send e-mail
Cole Thomas  



Joined: 10 Feb 2019
Posts: 16
Location: Vanlue Ohio

PostPosted: Wed Mar 27, 2019 1:48 am    Post subject: Reply with quote

Ozzie wrote:
Had this problem with the wifes Fiat and the only method that worked was jacking the rear end, start car in gear, depress clutch and hitting the brakes repeatedly.
Basically if you dont want to disassemble it need a jolt or lots of them


Thank you sir, I appreciate it and will try it.
_________________
1982 Porsche 924 NA project
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group