Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Testing TPS on 924S

 
Post new topic   Reply to topic    924Board.org Forum Index -> 924S Discussions
View previous topic :: View next topic  
Author Message
rod30  



Joined: 05 Aug 2018
Posts: 20
Location: Carrolltom Mo

PostPosted: Thu Aug 23, 2018 1:43 am    Post subject: Testing TPS on 924S Reply with quote

This is on my 1987 924S.
Reading about testing the TPS says at terminal 2 on the DME connector I should get 0 ohms to ground when closed and infinite ohms with the the TPS open. I do get 0 when closed but I don't know how to read infinite on my meter.
Back to top
View user's profile Send private message Send e-mail
rod30  



Joined: 05 Aug 2018
Posts: 20
Location: Carrolltom Mo

PostPosted: Thu Aug 23, 2018 7:13 am    Post subject: Testing TPS on 924S Reply with quote

OK, I removed the TPS and opened it up and it's broken. The arm that opens and closes the contacts is broken. So, I will by a replacement.
Back to top
View user's profile Send private message Send e-mail
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> 924S Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group