Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

porsche n/a 924 transmission swap

 
Post new topic   Reply to topic    924Board.org Forum Index -> Performance Upgrades
View previous topic :: View next topic  
Author Message
zubair  



Joined: 03 Aug 2018
Posts: 2
Location: south africa

PostPosted: Sat Aug 04, 2018 6:11 am    Post subject: porsche n/a 924 transmission swap Reply with quote

hi guys i have porsche 924 n/a 1981 and am swapping in an audi/vw 1.8T because my motor was blown when i baught the car and parts are expensive and difficult to get in South Africa. i wanted to know if there are any bolt in transaxle upgrades i can make. if i get a 944 transaxle what will all need to be changed and is the any bolt on option looking for about 300hp max
_________________
zubair solomon
Back to top
View user's profile Send private message
MikeJinCO  



Joined: 08 Jun 2010
Posts: 1227
Location: Maysville, Colorado

PostPosted: Sat Aug 04, 2018 10:42 pm    Post subject: Reply with quote

944 has a larger input shaft so get the torque tube also. The shift linkage should be the same, but if it's available you might get it also. Someone else will have to comment about the clutch disc. Check the engine swap section there have been several.
_________________
Mike


'67 MG Midget Dp
'71 Ocelot Dsr Kawasaki 1000(under rebuild)
Back to top
View user's profile Send private message Visit poster's website
ideola  



Joined: 01 Oct 2004
Posts: 15548
Location: Spring Lake MI

PostPosted: Sun Aug 05, 2018 10:03 am    Post subject: Reply with quote

A Bronco II clutch disc will work...has right spline arrangement for the larger 944 driveshaft.
_________________
erstwhile owner of just about every 924 variant ever made
Back to top
View user's profile Send private message
zubair  



Joined: 03 Aug 2018
Posts: 2
Location: south africa

PostPosted: Mon Aug 06, 2018 4:00 am    Post subject: Reply with quote

at the moment i have the standard transaxel in but i just wanted to know if there is anything i can directly swap that is stronger
_________________
zubair solomon
Back to top
View user's profile Send private message
ideola  



Joined: 01 Oct 2004
Posts: 15548
Location: Spring Lake MI

PostPosted: Mon Aug 06, 2018 6:23 am    Post subject: Reply with quote

Required reading.
http://garage.ideola.com/downloads/G31-Trans-Updated-20100207.pdf
_________________
erstwhile owner of just about every 924 variant ever made
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Performance Upgrades All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group