924Board.org

[Carrera RSR]

Here is a FIA Certified + MSA Blue Book (UK spec) weld in cage produced by Safety Devices and installed by a highly regarded expert in 924/944/968 race cars.

Essentially the same as my bolt in cage but with additional X door bar and transmission tunnel brace.

jpg-3 by stevenmcooper, on Flickr

jpg-4 by stevenmcooper, on Flickr
_________________
1980 931 - forged pistons, Piper cam, K27/26 3257 6.10 hybrid turbo, 951 FMIC, custom intake, Mittelmotor dizzy & cam pulley, H&S exhaust, GAZ Gold, Fuch'ed, Quaife
Now www.924board.org/viewtopic.php?t=34690
Then www.924board.org/viewtopic.php?t=31252

[Sunset924]

Brockoli,

No, 1.75" DOM, is not needed per regulation, but I do have a few sticks left over from a Jeep build. Rather than re order, I figured I would utilize it for this project. It is slightly overkill, there will be a small weight penalty, and the bar will be 1/8" lower in the passenger compartment than 1.50", but I think it will still work out.

Thanks to everyone for the info / cage / bar pictures; great stuff! Feel free to keep adding

[Noahs944]