Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Ride height - Measurement check

 
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions
View previous topic :: View next topic  
Author Message
Juel72  



Joined: 30 Mar 2017
Posts: 8
Location: Frederikshavn, Denmark

PostPosted: Mon Apr 09, 2018 11:13 pm    Post subject: Ride height - Measurement check Reply with quote

I am getting ready to install a rebuild rear suspension in my 83' 924.

But I suddenly doubted the measurements I noted 3 months ago

Is there anyone who can help me with the following measurement.

I need the distance between the upper rearmost corner of the spring plate to the top edge of the banana bar.
Or maybe the measurement from the upper edge banana bar to the wheel hub.
Unloaded, suspension off the car.

My car is a euro car with standard ride height. 23,5mm torsion bars and 14mm sway bar.

Maybe someone has a rear suspension laying around. Just to check that I am not doing something wrong.

Thank you in advance.

B/R
Flemming Juel
Back to top
View user's profile Send private message
morghen  



Joined: 21 Jan 2005
Posts: 7785
Location: Romania

PostPosted: Tue Apr 10, 2018 12:48 am    Post subject: Reply with quote

Do a search on this forum, perhaps use google to search the forum as its better.
I did the rear lowering about 14 years ago...thread should still be around.
There are also many others who did this and there is a lot of information hidden in this forum, just use the search or better, learn to google search into a specific website.
_________________
red 924 and not red 924
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger MSN Messenger
924-76  



Joined: 05 Jun 2006
Posts: 1332
Location: Ontario, Canada

PostPosted: Tue Apr 10, 2018 1:17 am    Post subject: Reply with quote

Try this: http://www.924board.org/viewtopic.php?t=31669&highlight=heighth+height
_________________
1976 924 N/A ROW SOLD
1980 931S
1981 931 Part car RIP
Back to top
View user's profile Send private message Send e-mail
Juel72  



Joined: 30 Mar 2017
Posts: 8
Location: Frederikshavn, Denmark

PostPosted: Tue Apr 10, 2018 1:26 am    Post subject: Reply with quote

I have searched and searched.
Found many posts about this issue.

But nothing about the standard measurements. At least what I can find.
Maybe some one has a standard rear suspension laying around.

I have a measurement that says 30,5 cm from the banana bar to the edge of the wheel hub. But I am unsure if it is to the lower or upper edge of the banana bar.
Back to top
View user's profile Send private message
CÚdric  



Joined: 27 Aug 2004
Posts: 1675
Location: Sweden

PostPosted: Tue Apr 10, 2018 1:33 am    Post subject: Reply with quote

Have you checked the factory litterature? I think the numbers are in there somewhere.
_________________
┤79 924
http://www.garaget.org/show.php?car=211
┤80 924 Turbo
http://www.garaget.org/?car=160275
Back to top
View user's profile Send private message MSN Messenger
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> General Discussions All times are GMT + 11 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group