View previous topic :: View next topic |
Author |
Message |
bureau13
Joined: 07 Sep 2017 Posts: 480 Location: South Florida
|
Posted: Tue Feb 06, 2018 2:40 am Post subject: Alternator mount/bracket |
|
|
When I loosened the alternator to remove the belt, I noticed that the black metal bracket/brace that attaches at the rear of the top/PS mounting ear on the alternator and the intake manifold is broken. I can't find a replacement anywhere, but I don't have a good source of used parts, and I can't find a part number at all in PET. Anyone know where to get one of these?
I have a picture but I don't seem to be able to post them here...
After replacing my lower radiator hose, I found that the small coolant leak I have is not coming from there...I have a pinhole leak near the clamp on the elbow that is right below the alternator. I think I'll have to remove the alternator to get to it, so I would like to fix that bracket while I'm at it if I can find one... _________________ -----------------------------------------
1982 931
1986.5 Silver 928S
2007 Hummer H3 (Daily Driver)
Past lives (I miss them all):
2004 RX-8 (Wrecked)
1993 RX-7 (Sold)
1987 RX-7 Turbo II (Sold)
1985 RX-7 GSL (Stolen) |
|
Back to top |
|
|
MikeJinCO
Joined: 08 Jun 2010 Posts: 1228 Location: Maysville, Colorado
|
Posted: Fri Feb 16, 2018 9:43 am Post subject: |
|
|
I think I have the complete alternator mount. I'll send a pm with email, send me a picture. _________________ Mike
'67 MG Midget Dp
'71 Ocelot Dsr Kawasaki 1000(under rebuild) |
|
Back to top |
|
|
|