Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

'88 944 for sale...($900)

 
Post new topic   Reply to topic    924Board.org Forum Index -> Cars and Parts Wanted/For Sale
View previous topic :: View next topic  
Author Message
Ian89C4  



Joined: 01 Apr 2011
Posts: 480
Location: North Carolina

PostPosted: Sun Oct 08, 2017 9:26 am    Post subject: '88 944 for sale...($900) Reply with quote

I figured that I would offer it up here before the wider world.

Up front: asking $900 with firebottle. Will have stock seat in it.

In North Carolina - not looking to part it (she really is a good little start for a race car!)

1988 944 (base edition - Non LSD trans)
117K + miles
No title - bill of sale only (guy I got it from was doing the race car thing as well)

Me and a buddy were going to turn it into a Chump/World Racing League endurance car, but we have decided to shift directions. The car runs and drives. Only warning light is the brake wear sensors (see proof of life gauge photo). I have had it up 80 mph in current condition (needs new shocks) but brakes are good and no odd shimmying or mechanical issues.

Minor damage to the left rear...surface only, no frame issues. Used to be guards red, as you can see from the interior, no idea why it was rattle canned. Windshield is shot, needs lexan or a new one. Oil looked and smelled good when I drained it and threw some 20W50 in there, changed plugs as well (they looked great...a little rich though). I have not looked inside the fuel tank, but being the plastic one, I doubt there are issues. Pump runs great and there are no fuel starvation issues. There is (was?) a minor power steering leak (can see in the pics), but there is no noise coming from the pump and the rack works fine. There is whining when the engine is running, but it has been located at the back of the alternator (most likely a bearing).

The big question: I pulled the timing and balance belt cover off and checked them. They look very good (no deterioration of the belts and the tension is as it should be per the descriptions I read on the pelican boards (I do not have the tool)). That being said, I cannot tell you the last time they were changed, I have had the car for around 3 weeks and have run it up 4 times and drive it once for about 5 miles.

I can provide video of it running if you would like or are interested in the car.












I also have the full exhaust and fog lights. Exhaust will need work, but you can quiet it down from the glasspack that was on there if you want.
Harness bar is for an early 911...but you can have that as well if you would like (for a little extra).


Shoot me a note if you are interested.
_________________
Ian Edgerly
Spiveys Corner, North Carolina

Current:
1981 924 Weissach Race Car ("Serenity")
1980ish 931 ("Alice")
Back to top
View user's profile Send private message Visit poster's website
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Cars and Parts Wanted/For Sale All times are GMT + 11 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group