Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

location of 924cgt air intake, side blinkers and rear panel?

 
Post new topic   Reply to topic    924Board.org Forum Index -> Body and Interior
View previous topic :: View next topic  
Author Message
PieszczoH  



Joined: 03 Dec 2009
Posts: 57
Location: Warsaw Poland

PostPosted: Fri May 05, 2017 7:40 pm    Post subject: location of 924cgt air intake, side blinkers and rear panel? Reply with quote

Hi every one...
I thought I will ask for every one that tries to build 924CGT replica
Does any one know dimensions for:
locating the air intake in the hood?
locating the 928 blinker in the front wings?
locating the rear arch from the body line?
Back to top
View user's profile Send private message
v8carreragts  



Joined: 05 Sep 2003
Posts: 651
Location: Tucson, AZ

PostPosted: Mon May 15, 2017 12:09 pm    Post subject: Reply with quote

I can get you the dimensions for the hood scoop. The rear arches depend on which ones you have. The CGT and CGTS are slightly different. The CGTS mount a little higher than the CGT.
_________________
84 944--924 Carrera GTS clone w/520HP Chevy 302 V8--RUNNING!
2013 AUDI Q5
2013 Dodge Charger R/T AWD HEMI
Back to top
View user's profile Send private message
morghen  



Joined: 21 Jan 2005
Posts: 7657
Location: Romania

PostPosted: Mon May 15, 2017 6:47 pm    Post subject: Reply with quote

The GTS ones are taller, they all mount vertically to match the reflect line of the car, and horizontally there is a feature in the back where it meets the bumper that has to sit at the nominal gap with the bumper. That positions the rear arches.

Front blinkers is more difficult...you can buy my original CGT front wings and be done with it
_________________
red 924 and not red 924
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger MSN Messenger
PieszczoH  



Joined: 03 Dec 2009
Posts: 57
Location: Warsaw Poland

PostPosted: Tue May 16, 2017 9:29 am    Post subject: Reply with quote

Guys I know that CGTS and CGT rear arches are different. I know that it is like 1cm vs 3cm from the body line... but if someone has a CGT or knowledge it would be the best to speak.

What I think about front blinkers is that they start just like in the 944 just after the body line pressed in the front wing, but due to the longer blinker they ends more to the front.

as for the intake.... info would be apreciated.
Morghen as for the rear arches I don't know if i understand You right.
What feature are You thinking of?
What I belive it has to make straight line arch and bumper from profile view
There was an Ideola CGTs picture showing that.
Back to top
View user's profile Send private message
morghen  



Joined: 21 Jan 2005
Posts: 7657
Location: Romania

PostPosted: Tue May 16, 2017 5:13 pm    Post subject: Reply with quote

Buy these and you're set:
http://www.ebay.de/itm/Kotflugel-Front-fenders-front-wings-fur-Porsche-924-Carrera-GT-original-937-/162507604778?hash=item25d635432a:g:iaQAAOSwhvFZD7J5

Have a look at the matching of the rear arches and the rear bumper, there is a small lip/feature that tells you how to position the parts front to rear.


_________________
red 924 and not red 924
Back to top
View user's profile Send private message Visit poster's website Yahoo Messenger MSN Messenger
PieszczoH  



Joined: 03 Dec 2009
Posts: 57
Location: Warsaw Poland

PostPosted: Thu May 18, 2017 7:11 am    Post subject: Reply with quote

Ok so rear arches depends on the reproduction of the arches that You are able to buy.
Back to top
View user's profile Send private message
ideola  



Joined: 01 Oct 2004
Posts: 15460
Location: Woodstock IL

PostPosted: Thu May 18, 2017 11:31 am    Post subject: Reply with quote

CGT pix here and here.

I will try to get measurements this weekend.
_________________
15 981 GTS | 88 924S SE | 82 931 Holbert | 82 931 Rallye | 81 937 | 81 Euro 931 | 81 Weissach | 80 US 928 | 80 US 931 '941' | 80 US 931 | 80 931 GTR | 79 Sebring | 78 D-Prod Replica | 78 w/D-Prod kit | 78 Poli-Form | 78 Limited Edition | 77 Martini
Back to top
View user's profile Send private message
v8carreragts  



Joined: 05 Sep 2003
Posts: 651
Location: Tucson, AZ

PostPosted: Sun May 21, 2017 7:18 am    Post subject: Reply with quote

The right side of the scoop is 12" from the edge of the hood at the closest part and the front is 10 1/2" from the front of the hood measured at the center of the scoop.
_________________
84 944--924 Carrera GTS clone w/520HP Chevy 302 V8--RUNNING!
2013 AUDI Q5
2013 Dodge Charger R/T AWD HEMI
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Body and Interior All times are GMT + 11 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group