View previous topic :: View next topic |
Author |
Message |
jbob
Joined: 09 Feb 2008 Posts: 10 Location: seattle, wa
|
Posted: Tue Aug 23, 2016 4:23 am Post subject: finding few feet of the thin body side molding |
|
|
hey guys have a couple pieces of body side molding that are missing on my 924S and was hoping to find a source. are there any cheaper or better options by the foot than just going to the porsche dealer which i assume is more costly and inconvenient.
thanks so much guys _________________ '87 924S black/black |
|
Back to top |
|
|
Rasta Monsta
Joined: 12 Jul 2006 Posts: 11723 Location: PacNW
|
Posted: Tue Aug 23, 2016 9:06 am Post subject: |
|
|
If you don't care about protection any vinyl guy can lay a stripe down. Hand painted for a little more. _________________ Toofah King Bad
- WeiBe (1987 924S 2.5t) - 931 S3
|
|
Back to top |
|
|
edredas
Joined: 09 Dec 2004 Posts: 861 Location: Charlotte, NC
|
Posted: Wed Aug 24, 2016 6:23 am Post subject: |
|
|
Rasta Monsta wrote: | If you don't care about protection any vinyl guy can lay a stripe down. Hand painted for a little more. |
This is what I'm doing on my turbo. I got 36 feet of 1/2" pinstripe from NAPA for under $5. _________________ '84 944 -White, Brown interior
'84 944 -Red, Automatic
'86 944 -Garnet, Fully loaded, Koni suspension
'87 924S -Red, 300hp 951 swap
'87 924S -Red, Project Car
'88 924S -Red, Daily Driver |
|
Back to top |
|
|
edredas
Joined: 09 Dec 2004 Posts: 861 Location: Charlotte, NC
|
Posted: Fri May 05, 2017 12:41 pm Post subject: |
|
|
I came across this at pep-boys and thought others might like to try it. This looks to be a very close match to our OEM trim. I was there getting other things but may pick some up to use instead of the pin stripping. The package includes 20 feet for $14.99.
_________________ '84 944 -White, Brown interior
'84 944 -Red, Automatic
'86 944 -Garnet, Fully loaded, Koni suspension
'87 924S -Red, 300hp 951 swap
'87 924S -Red, Project Car
'88 924S -Red, Daily Driver |
|
Back to top |
|
|
|