Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

accessory belt issue

 
Post new topic   Reply to topic    924Board.org Forum Index -> 924S Discussions
View previous topic :: View next topic  
Author Message
jvandyke  



Joined: 30 Mar 2016
Posts: 212
Location: Hudsonville, MI

PostPosted: Thu Sep 15, 2016 3:49 am    Post subject: accessory belt issue Reply with quote

Trying to install power steering and alt/ac belt.
Here's what I have.
Managed to barely get AC belt on the pulleys but barely (still not toothed in correctly)
When I pull it up on Pelican I get several different sizes from 736mm to 1000mm, how is that possible? my 990 is on but not really
Power steering is way too short it seems. I have an 888 but see 950 mentioned, did Pelican send me the wrong one?
When I run it through a parts place as a 924s I get a 15370, as a 944 I get 15375 (37" and 37.5" respectively whereas the 888 I was given is the equivalent to a 34.9" belt, how did I get that?)

I will pick up a 37" belt on the way home.
I should probably get a longer one for the AC/alt too since I had to fight like mad to get "sorta" on.
Seriously, this should be the easy part........
_________________
87 924S project, '83 944 engine,
my son's first car.
Back to top
View user's profile Send private message
Paul  



Joined: 02 Nov 2002
Posts: 9491
Location: Southeast Wisconsin

PostPosted: Sun Sep 18, 2016 9:23 am    Post subject: Reply with quote

Running yet?
_________________
White 87 924S "Ghost"
Silver 98 986 3.6l 320 HP "Frank N Stein"
White 01 986 "Christine"
Polar Silver 02 996TT. "Turbo"
Owned and repaired 924s since 1977
Porsche: It's not driving, it's therapy.
Back to top
View user's profile Send private message Send e-mail
jvandyke  



Joined: 30 Mar 2016
Posts: 212
Location: Hudsonville, MI

PostPosted: Sun Sep 18, 2016 12:24 pm    Post subject: Reply with quote

Paul wrote:
Running yet?

ha! no not hardly
Belts on, 370 was quite tight too but on
raditator and fans, hoses, done, have to tackle the vacuum hoses and harness install next, last big obstacle is figuring out all that vacuum routing.
_________________
87 924S project, '83 944 engine,
my son's first car.
Back to top
View user's profile Send private message
hdrider19  



Joined: 03 May 2016
Posts: 193
Location: Catawissa Missouri(40 mi sw of St Louis)

PostPosted: Sun Sep 18, 2016 12:52 pm    Post subject: Reply with quote

jvandyke wrote:
Paul wrote:
Running yet?

ha! no not hardly
Belts on, 370 was quite tight too but on
raditator and fans, hoses, done, have to tackle the vacuum hoses and harness install next, last big obstacle is figuring out all that vacuum routing.


Clark's garage has a pretty good vacuum diagram.
_________________
87 924S
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> 924S Discussions All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group