View previous topic :: View next topic |
Author |
Message |
Min
Joined: 04 Nov 2002 Posts: 2368 Location: Vernon, British Columbia, Canada
|
Posted: Sun Aug 03, 2014 8:01 am Post subject: Aluminum Fuel Rail Kits. |
|
|
Just trying to judge interest, I am making an Aluminum Fuel Rail kit for 924's this kit will fit 924 na and 924 turbo's without front head breather. I am working on a modified front breather plate that will work with the rail in place. but have not completed that project yet.
It will be about 200 dollars and included 4 cnc machined low profile injector bungs, a fuel rail (smooth, not ridged as the below one is, unless someone wants a ridged rail specifically), the cnc machined fuel rail mount shown in the below pictures and two o-ring boss AN-6 fittings in a silver finish as per below.
Depending on interest these would be available in approximately a month.
Min _________________ Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting. |
|
Back to top |
|
|
Rasta Monsta
Joined: 12 Jul 2006 Posts: 11724 Location: PacNW
|
Posted: Sun Aug 03, 2014 8:20 am Post subject: |
|
|
631 days away! Good god man, what's shakin? _________________ Toofah King Bad
- WeiBe (1987 924S 2.5t) - 931 S3
|
|
Back to top |
|
|
Min
Joined: 04 Nov 2002 Posts: 2368 Location: Vernon, British Columbia, Canada
|
Posted: Sun Aug 03, 2014 12:39 pm Post subject: |
|
|
Rasta Monsta wrote: | 631 days away! Good god man, what's shakin? |
Not a whole lot, been reading the board, just haven't had anything to post. I built a cnc router, need anything cut?
Min _________________ Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting. |
|
Back to top |
|
|
tyfighter123
Joined: 19 Jan 2010 Posts: 551 Location: Colorado
|
Posted: Wed Aug 06, 2014 3:56 am Post subject: |
|
|
Min, I would be interested in your fuel rail. _________________ Porsche 924 1977 N/A
Mustang GT/CS 2007
Porsche 924S 1987 (parts car)(cut up and recycled)
Porsche 911S 1976
Porsche 931 1980
Porsche 931 1980 (parts car) |
|
Back to top |
|
|
Shurick
Joined: 15 May 2005 Posts: 524 Location: Russia, Moscow.
|
Posted: Wed Aug 06, 2014 6:26 am Post subject: |
|
|
I'm interested for sure. _________________ WBR, Shurick
'79 931 -- intercooled K26-3060-6.10 turbo @ 1.2 bar, EFI+EDIS, 951S brakes, stripped interior, 951 look.
'86 924S -- R.I.P.
https://www.instagram.com/ru_pacecar/ |
|
Back to top |
|
|
CorsePerVita
Joined: 25 Jul 2008 Posts: 1992 Location: Redmond, Oregon
|
Posted: Wed Aug 06, 2014 11:38 pm Post subject: |
|
|
Min wrote: | Rasta Monsta wrote: | 631 days away! Good god man, what's shakin? |
Not a whole lot, been reading the board, just haven't had anything to post. I built a cnc router, need anything cut?
Min |
Not gonna lie, I'm pretty jealous of that. That sounds awesome! _________________ - 1977 Porsche 924 2.0 N/A (Trackday Project)
- 1979 Porsche 924 2.0 N/A (The other daily)
- 1980 Porsche 931 (Daily)
- 1987 Lamborghini Jalpa
- 1999 Ducati 900SS |
|
Back to top |
|
|
Min
Joined: 04 Nov 2002 Posts: 2368 Location: Vernon, British Columbia, Canada
|
Posted: Thu Aug 07, 2014 9:59 am Post subject: |
|
|
CorsePerVita wrote: | Not gonna lie, I'm pretty jealous of that. That sounds awesome! |
It is. I can cut gasket material up to .250 thick, copper headgaskets can be machined, plastic parts (phenolic spacers for example), intake bits such as flanges etc. I also have a flame attachment so I can cut up to 5-6 inch thick steel plate. It'll do engraving, etc. The only thing I can't really cut with it is stainless steel at the moment, but if I need that done I have other methods available.
Min _________________ Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting. |
|
Back to top |
|
|
Kenodog
Joined: 25 Jun 2003 Posts: 2651 Location: Vancouver,B.C.
|
Posted: Wed Aug 13, 2014 3:12 am Post subject: |
|
|
MIn, I will take a rail and one of the fan shrouds. Let me know when it's done and I will come and pick it up.
Leigh _________________ 1979 Euro 931, Olive
1981 931, Sabine
1991 Ford Ranger XLT 4x4, Ricky
1996 Ford E-350 ex-FedEx Van
2014 Mazda CX-5 (Kinderwagon)
2019 KTM 790 Adventure
2024 KLX300
2024 KLX140 |
|
Back to top |
|
|
MackTheKnife
Joined: 22 Jul 2014 Posts: 12 Location: Central Coast NSW Australia
|
Posted: Mon Aug 18, 2014 3:31 pm Post subject: |
|
|
I'll take a rail if you can it ship to Australia. _________________ Paul Mc - Proud owner of:
'80 924 Turbo (ROW)
'12 VW Polo GTI
'00 Mitsubishi Pajero Exceed |
|
Back to top |
|
|
Min
Joined: 04 Nov 2002 Posts: 2368 Location: Vernon, British Columbia, Canada
|
Posted: Tue Aug 19, 2014 10:03 am Post subject: |
|
|
Alrighty, I'll start making a run of them for you guys. I can ship anywhere as long as you pay shipping.
Min _________________ Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting. |
|
Back to top |
|
|
tyfighter123
Joined: 19 Jan 2010 Posts: 551 Location: Colorado
|
Posted: Mon Aug 25, 2014 4:33 am Post subject: |
|
|
any news on these? _________________ Porsche 924 1977 N/A
Mustang GT/CS 2007
Porsche 924S 1987 (parts car)(cut up and recycled)
Porsche 911S 1976
Porsche 931 1980
Porsche 931 1980 (parts car) |
|
Back to top |
|
|
Min
Joined: 04 Nov 2002 Posts: 2368 Location: Vernon, British Columbia, Canada
|
Posted: Wed Aug 27, 2014 11:36 am Post subject: |
|
|
Yep, I am in the process of getting all the material and cnc machined bits have been ordered, waiting for them to get finished. Will keep you posted.
Min _________________ Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting. |
|
Back to top |
|
|
MackTheKnife
Joined: 22 Jul 2014 Posts: 12 Location: Central Coast NSW Australia
|
Posted: Thu Aug 28, 2014 11:39 am Post subject: |
|
|
Thanks for this Min! _________________ Paul Mc - Proud owner of:
'80 924 Turbo (ROW)
'12 VW Polo GTI
'00 Mitsubishi Pajero Exceed |
|
Back to top |
|
|
Min
Joined: 04 Nov 2002 Posts: 2368 Location: Vernon, British Columbia, Canada
|
Posted: Mon Sep 15, 2014 8:51 am Post subject: |
|
|
I have received all the bungs I had machined, however I am still waiting on fuel rail material before I can complete these kits. I'll let you know when my material order arrives.
Min _________________ Custom means it didn't come from a box.
1980 n/a with EDIS and Megasquirt II Injection. 7 different colors and counting. |
|
Back to top |
|
|
tyfighter123
Joined: 19 Jan 2010 Posts: 551 Location: Colorado
|
Posted: Tue Oct 28, 2014 6:26 am Post subject: |
|
|
Hey Min, Any updates on these?
THanks _________________ Porsche 924 1977 N/A
Mustang GT/CS 2007
Porsche 924S 1987 (parts car)(cut up and recycled)
Porsche 911S 1976
Porsche 931 1980
Porsche 931 1980 (parts car) |
|
Back to top |
|
|
|