Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

recharging your Air Conditioning

 
Post new topic   Reply to topic    924Board.org Forum Index -> Links
View previous topic :: View next topic  
Author Message
wdb  
Guest





PostPosted: Tue May 28, 2002 10:43 pm    Post subject: Reply with quote

To convert a properly functioning automotive R-12 system to FRIGC (FR-12), an installer must:


Recover and recycle the R12;
Evacuate the system ( for approximately 30-45 minutes); using a vacuum pump
Add approx. 2 oz. of Ester (POE) oil
Charge the system to approximately 80 to 90% of the R12 capacity and install the under-hood "system identification retrofit label".
Install retrofit fittings on the high and low side service ports;

It's that simple! In some cases, it may be necessary to adjust the cycling pressure switch on CCOT systems for optimum performance

http://www.refimax.com/products/fr12.htm

http://pacific.bizjournals.com/pacific/stories/1996/07/15/story6.html

dont forget to replace O-rings first
detailed instructions

http://www.refimax.com/products/fr12_instructions.htm#charging

_________________
79 924 n/a
"What one man can do, another can do."
Anthony Hopkins, The Edge

[ This Message was edited by: wdb on 2002-05-28 22:30 ]
Back to top
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Links All times are GMT + 11 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group