924Board.org

iambudge · Joined: 29 Mar 2005 Posts: 21 Location: Somerset. UK

Anyone know what the bellhousing PCD is on an audi V6. I have a 2.6 in my A4 Quattro and if it can haul that overweight lardass of a car up to indecent speeds damn quick, it may be a candidate for a transplant at the end of this years sprint season. Did a quick search and most other V6 engines came up but not Audi...
_________________
1981 NA 924 - Daily driver/sprints/hillclimbs
VW golf GTI Sprints/hillclimbs
Audi A4 2.6

CBass · Joined: 03 Nov 2002 Posts: 2807 Location: Vancouver, Canada

My advice would be to ask some Audi guys if that V6 will bolt to a 5 cylinder's transmission, or vice versa. The 924 engine shares the same bellhousing pattern and spacing as the 5 cylinder.

Good luck.
_________________
'81 931 in various states of assembly

moone924 · Joined: 05 Feb 2003 Posts: 867 Location: Douglas Wyoming

it will
_________________
Ryan Moone

Always shopping for a nice s2 931 to baby.
New philosophy : one car project at a time.

Keaton · Joined: 02 Jan 2006 Posts: 261 Location: 85202

ok so i have looked through the engine trasplants looking for Audi V6's and really didnt fint any thing useful. So i found a factor rebuild Audi V6 with a 90k mile warrenty 2.8L 12 valve for $500, then add in a Megasquirt EFI kit and drop it in my car.
i know i'll need to make motor mounts and oil pan and oil pick up
so the question is:
1) will it fit?
2) bellhousing, will it bolt up or do i need to coustomize it?
3) should i quit dreaming and go with what i have in the car