Show full size 924Board.org
Discussion Forum of 924.org
 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 
 Technical FAQ924 FAQ (Technical)   Technical924 Technical Section   Jump to 924.org924.org   Jump to PCA 924 Registry924 Registry

Heres my cam gear.

 
Post new topic   Reply to topic    924Board.org Forum Index -> Performance Upgrades
View previous topic :: View next topic  
Author Message
Joes924  
Guest





PostPosted: Thu Mar 21, 2002 5:03 pm    Post subject: Reply with quote

Still experimenting with it.. its fun
http://home.attbi.com/~joedanka/924/camgear.JPG



_________________
porsche9241979Joe



[ This Message was edited by: Joes924 on 2002-03-30 18:25 ]
Back to top
Vince Ponz  
Guest





PostPosted: Fri Mar 22, 2002 1:37 am    Post subject: Reply with quote

Looked at your picture of the engine boy does it look busy. Remember I have carbs and there is nothing in the engine bay. My MSDS is on the other side. Nice colors in the bay.
One word of warning. It dosen't look like you have the hose on from the front of the car to the Alternator. You need it on.
Back to top
Joes924  
Guest





PostPosted: Fri Mar 22, 2002 4:53 pm    Post subject: Reply with quote

I need it on really..
Back to top
TroyDest  
Guest





PostPosted: Fri Mar 22, 2002 10:49 pm    Post subject: Reply with quote

Hey Vince, BUSY!? Have you looked at a 931 lately? I have the same cam gear as Joe on my '82 931 and I'm jealous! It takes about 2 hours for me to change my cam degree because I have to remove the air cleaner, air flow meter, and alternator belt in order to get to it!

What's the deal with the alternator hose? Isn't it just a cooling duct? The 931 doesn't have any means of cooling the alternator and there are no problems with it. -Troy
Back to top
Vince Ponz  
Guest





PostPosted: Sat Mar 23, 2002 2:34 am    Post subject: Reply with quote

My cam gear is on the engine now but the engine is not ready to start. I loved it when it was on. Rebuilding the 24 engine.
The 931 I have does not have the cool hose either. But , since the alt in a 924 is close to the exhaust then they put a hose from the front to the alt.
Putting on the hose adds 42.5 HP to the engine.
Back to top
numbers  
Guest





PostPosted: Sat Mar 23, 2002 4:52 am    Post subject: Reply with quote

Yep! And switching to a Delco was worth another 50 in my '931
Back to top
Joes924  
Guest





PostPosted: Tue Apr 16, 2002 5:05 pm    Post subject: Reply with quote


If you dont use the thing you shorten the life of the alt. bought mine rebuilt for 79.00
Back to top
Geddy T  
Guest





PostPosted: Mon Apr 29, 2002 9:11 pm    Post subject: Reply with quote

autohausAZ.com has brand new alternators for $100. I just ordered one.
Back to top
Joes924  
Guest





PostPosted: Tue Apr 30, 2002 3:49 pm    Post subject: Reply with quote

Way to go. Its been awhile, I put on a bigbore tb & have the cam advanced all the way, its time to experiment.. Theres amark
the po used its way back there in retard land
just a little bit forward of all the way retarded.I spent some time today adjusting
the valves but didnt play with the gear.It pulls real strong in a higher gear up to 80 mph. Cant waite till I get the ported head, cam,header exhaust on ..

_________________
Joe D.from Denver Colorado residing in Oregon

RTFAQ

[ This Message was edited by: Joes924 on 2002-05-26 15:33 ]
Back to top
Display posts from previous:   
Post new topic   Reply to topic    924Board.org Forum Index -> Performance Upgrades All times are GMT + 11 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group