|
924Board.org Discussion Forum of 924.org
|
View previous topic :: View next topic |
Author |
Message |
droog77 Guest
|
Posted: Tue Mar 26, 2002 4:25 pm Post subject: |
|
|
I just removed the right front fender of my 77 non turbo. I removed all of the bolts, except one. In the very front, just under the corner of the headlight. It threads into the fender, and the head of the bolt is not visable. I coulnt see how to remove that bolt, so I just forced the fender off, it was damaged anyway. My question is, how do I get to the back side of this bolt to attatch the new fender? Thanks in advance!
Cheers,Danny
|
|
Back to top |
|
|
924RACR
Joined: 29 Jul 2001 Posts: 8803 Location: Royal Oak, MI, USA
|
Posted: Wed Mar 27, 2002 1:33 am Post subject: |
|
|
Remove the rubber strip tucked under the edge in front of the headlight (with the headlight up). You can then fit a 10mm socket with extensions and universal joint into there and turn the bolt.
_________________ Vaughan Scott
Webmeister
'79 924 #77 SCCA H Prod racecar
'82 931 Plat. Silver
#25 Hidari Firefly P2 sports prototype |
|
Back to top |
|
|
|
|
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
|
Powered by phpBB © 2001, 2005 phpBB Group
|