924Board.org

Ok I bought a brand new starter for my 1980 924 since the old one would barely turn over the engine, but my new problem is that when I turn the key, sometimes the engine keeps cranking over and I have ...

Ok so I’m replacing all of the connecting rod nuts on another 924 which have a thread of m10x1.0 and a head of 15mm and I can’t find them at all. I can find 12 pt connecting rod nuts for the 2.5l but ...

Hey guys I have an 80 924 that I just repainted and had th le engine out of. It didn’t run before but the previous owner must’ve dicked around with the CIS adjustment and it doesn’t run. I’ve checked ...

Ok so I rebuilt the top end of my 924 (new head gasket ground valves etc) and now I got to trying to start it. At first I wasn’t getting fuel past the injectors but I adjusted the screw in the Fuel Di ...

So I have a 1980 porsche 924 and it has quite a few disconnected (chewed through) wires. I would be willing to assume the two bundles of black, red and brown wires connect but there is also 2 brown wi ...

So today I was cleaning some grounds on my 80 924 because the fuel pump wouldn't always come on but once I got back up I looked at my dash and the temp gauge and fuel gauge were all the way clockwise, ...

I bought a '80 924 and it wouldn't pump fuel so I took the leads off the pump and had someone crank the car while I had a multimeter on the lead and I didn't have anything. I also jumped 30 and 87 on ...