924Board.org

Ok cool, would it make a difference if I were to change the connections and use an ignition coil off a 79na?

Hi All,

I recently acquired a project 1981 931 after my NA took a crap. Been sitting for a while so there are definitely many things that need love on it. I’ve read up on fuel system trial and e ...

1982 924 turbo - https://www.facebook.com/share/1LobaQ1jj3/?mibextid=wwXIfr

1977 924 - https://www.facebook.com/share/18s4q5PCsj/?mibextid=wwXIfr

Hi All,

My running daily/project 924 has recently become a full-fledged project car unfortunately. Love the 924/944 look and feel and would rather fix it up and make it my own instead of just part ...

My race car wasn't charging even though the red light would go out once I started the engine. Turns out that a ground from the alternator housing to the engine block was loose and causing a problem. ...

You might try to bypass the connection directly from the alternator to see if the problem is on the wiring.

I bypassed the exciter wire to the battery and checked all the grounds again. I put in a ...

Yes I’ve measured the voltage at the battery and it reads around 12.2v, and bypassing it altogether was going to be my next thing I tried.

Thanks for the replies, I’ve already checked the wires up the 3 way plug so those are all good but after that I loose where the wire goes through the harness but seeing that it goes straight to the ...

I’ve replaced the alternator and had the alternator tested to make sure it works and it does.

I’ve replaced all the B+ wires that go from the alternator to starter then to battery positive so ...

I’m having electrical issues to the point where I have to jump my car every time. Originally, it was an alternator problem so I replaced it and it worked barely with me having to sit and idle before ...

After a good flush and using a pressure tester loaned from auto-zone found a broken hose in the back and cleaned out some gunk. Glad to have it back on the road and thanks your your help👍

Yeah the fans still work, I’m gonna get it back flushed at a shop hopefully next week and hopefully that fixes the problem. Thanks for the advice though!

I haven’t looked into the backend yet but I’ll give a look. There isn’t any coolant leaking onto the ground and there isn’t oil in the coolant either. I’m wondering if there is maybe a parti ...

Engine started overheating last week while belts started squealing. Figured it just needed a new belt and decided to put a new water pump on while I was at it.

Thought it fixed the problem but aft ...