924Board.org

...well Steve, the debugged download seems to have fixed the problem, and thanks so much for the assistance...everything now seems to be working as it should...because of the bug, I was very reluctant ...

...well, like most of us, I do have other things to do on a daily basis, so this project has been on the back burner for a little while...since my last post, I have added the Tuner Studio Auto-Tune fe ...

...so you are saying not to go to the dual table until the warmup tables are set?...also, while we're here, the warmup table requires that we move the cursor up rather than down to lean the mixture wh ...

...currently will start and idle while needing to be tweaked, but the FV gauge on Tuner Studio keeps being in the red and apparently not operating...needle going around twice ???...have tested the FV ...

...forgot to mention that the engine is pretty stock internally, and I initially want to run just the fuel system and add the others as things begin to come together...it is currently running the Cran ...

...thanks for getting back to me so quickly...I'm currently just setting up the idle and was wondering about setting the FV (MS/ign2) and how that will relate to everything else...it seems as if you h ...

...did you ever get the system installed and running?...I have the system installed and am currently doing some tuning ( I didn't get the nice book that you did)...thought you might be able to help... ...

...is the '80 931 distributor closer to a hall effect or vr ?...anyone been able to find info to that effect ?...to be more specific...what coding works best with the microsquirt ?...

...anyone know the proper pin for the ox sensor ground @ the computer plug...not the shield ground...'80 931...

...I think white is a good choice for what you are looking for, with the additional plus that it will be easy to repair...be sure to post the before's and after's...remember that it is a "high co ...

...just light, solid colors will hide a multitude of sins, white being the best... in addition to keeping the cockpit cooler...put your hand on a light colored car on a hot day, then put your hand on ...

...black is going to be a tough go , even for an experienced painter...your finished product will always be in the prep...if you are painting a Porsche, you will find that they use a very good base un ...

...924 na and AUDI with the threaded injector ports use a plastic adapter, as the na engine simply uses vacuum to retain the injector...the turbocharged engine uses a threaded adapter which also has t ...

...anyone sourced injector sleeves for the 931...S1?...not as part of some kit!...

...in answer to your question...she runs like a scalded cat ...would throw you into the back seat....if it had a back seat...