924Board.org

I bought a 79 parts car and during this winter I am pulling the fuel tank out of my 79 to replace suspected leaking hoses and possible rusted tank out.

Looking at it I was pleasantly surprised th ...

This weekend I put in refreshed control arms with powerflex bushings. but I have to wait for the alignment shop to open up. Last year I put in the front and rear sway bar bushings along with shocks an ...

Take it apart and put it back together. 4 screws on the bottom If still inoperable, pm me me for a replacement. Also with low pressure, blow out the lines. First remove the spray nozzles. Clean nozz ...

Are you wanting to make yours original or upgrade? I have ordered replacement bushings from PowerFlex and it appears that they don’t have all of the bushings available. It is curious to me that they o ...

What are your front sway bar specifications?
I have a 23mm.
The PET had other options.

What are your front sway bar specifications?
I have a 23mm.
The PET had other options.

Thanks. Now I don't need to justify $7.65/gal. I removed the cat earlier this year, put a header and replaced the pipes with only a muffler. Back to the 87 octane. :)

Any ideas what 2 gallons of this blue flame fuel would do to my injection, compression etc systems?

I've tried to rebuild them a few times using O rings from harbor freight and rebuild kits from the internet. Tried a few times with out and with Smurf poop(VERY THIN). I'm getting better at it, BUT I ...

It's the same as the other one. I got 1 from other cars from behind the glovebox. I think they are better protected from the elements. In the schematic they look different but they are the same. Matc ...

Problem solved.
i went to a salvage yard and pulled 3 of the relays out of other 924/944s brought them home and did tests on them.
BINGO.
Grabbed a few other relays for spares.
it was the relay ...

http://i1383.photobucket.com/albums/ah283/schwami/IMG_1850_zpscabe0inb.jpg?t=1494693302

AS reading a book!!!1-11 relays.

I replaced #3 with the replacement from pelican. The old one is non recov ...

Ahhh Mother's Day
And a beautiful day to work on your car!
I just replaced #3 so let's say it is a good unit from pelican.
From The schematics from above it looks like I need to test #1
I'm gue ...

Wow, thanks for the link! This will help. Totally missed that post.

The A/C works good (Brrrr) with the exception of the Pass fan not getting ANY power.
I've put a multi meter on it and tested the ...

After i pulled out the suspected relay, I plugged in the new one and did all the tests again to see if i was successful. Alas, no change. no power to the pass. fan.

I'm thinking that i could route ...