924Board.org

I asked a firm who sells 924parts too. They say that it is normal.

One problem, different answers.

I want t o replace my fuel accumulator. I bought a used one.

The seller told me that he was good, but there is fuel inside the accumulator. When i remove the screw at the bottom, fuel is coming ou ...

The hole car is original. But when you standing before the car there is a smal hole in the baterry tray in the left, front corner, like on the photo.
The tree other drains are oke.

I think i have ...

Thanks for the answers. But i'm right that there are two drain in the tray?

But i still can't find the end of the little drain in the corner.

The battery tray has two water drains. One big in te middle of the tray and a little one in the corner. Who can tell me where the water leaves the car by the little drain in the front corner off the t ...

Thanks for the answers everyone. I think that there are different versions of the oilstick. I'will lokk if i can modify the short one to a long one.

My 924 from 1981 has a short oil dipstick. Now i see that there are many 924's with a long dipstick in a pipe. My dipstick is putted directley into a hole in the motor.

Is there anyone who can tell ...

Thanks for the answer. Next question, i tried to repair the valve. Is the hole, when it's cold, enough on the picture?

http://farm4.static.flickr.com/3230/2903705627_e5740a0986_o.jpg

I have cold start problems with my 924. To fix it I will check all parts.

Now I checked my auxiliary air regulator. When I put 12V. on it it's closing after a time it's still open. It looks like wo ...

I used the sandpaper and polishing brush for the rim edges while the was turning on my wheel polisher contraption.

The spokes sanded I and brusched with spray (bottles).

First I used;

Waterproofed Sandpapier 400
than
Waterproofed Sandpapier 600
than
Waterproofed Sandpapier 1000
than
Waterproofed Sandpapier 1600
than
Waterproofed Sandpapier 2000

After tha ...

So it looks like you used a drill press to drive it...what did you mount the wheel itself on, and what did you use as the "belt"? Very cool idea, BTW! And the results are stunning!

I us ...

Thanks for the compliments. The car is in a good condition.
I placed the wheels a few months ago. They are from RIAL. It was a heavy job to get them like this. I polisched them on this selfmade tool ...

There are no leaks at all in the air/vacuum system. Yesterday i removed the plastic cap the mechanic placed. The car's idle is 1050 r/m.

I will ask if they can adjust the CO. The problems that i h ...

Yes it's from Zender. It was on the car when i bought it.