924Board.org

I solved this issue after the car broke down on the side of the road last Thursday night. After replacing the voltage regulator, the alternator conked out on a drive home after class. Replaced the sto ...

Did it already happen? I was wondering if you still had any of those 150A alternators leftover? If so, I might want one before the end of the year.

I need help diagnosing and resolving my alternator light issues on my 931. The light is fully lit when driving at night and a bit dimmer during the day (could be due to ambient lighting). A quick stin ...

I'm positive the thermofan switch on my 931 is on it's way out and because I can't remember what temp thermostat I originally purchased (IF I ever did, I can't find any record of it...) I'd like to ch ...

Works fine for me!

http://www.mcmaster.com/#9464K35

This one, with the 25mm ID and 3.5mm thickness?

Hate to revive a nine year old thread. But as I've recently bought a second K26 for rebuilding, and knowing this part is probably still NLA, I'd love to know what conclusions were drawn from this, if ...

Those will not work. They haven't got the provisions for the sway bar up front. If you're handy with fabricating then you could maybe use those. The part number you want is 477407153F and it looks lik ...

I've got one more thought before turning in for the night. What if the oil filter isn't loose, but the center threaded portion is? There's a stud that the filter threads onto if I remember right? So y ...

That's bizarre. I've replaced the filter three times on my own car and I've always done it as tight as I can by hand and maybe a little bit more. The best I can think of is something with the threads ...

Leave the gearbox on the torque tube. Drop the box off its mountings and allow it come down on a jack/support as far as it goes. It will be tight but potentially doable unless the old joint is really ...

https://i.kinja-img.com/gawker-media/image/upload/c_scale,f_auto,fl_progressive,q_80,w_800/bgcdngyno6mg3fwwg8xi.jpg
Somehow, I decided that installing this could wait, even after I had everything wit ...

I've had mine on for the last year. Less clutter in the garage for me, and it looks cool! I can still see the timing marks if needed.

I just got mine back in this afternoon. If you follow those directions exactly, it'll be a breeze! I could've saved an extra 30 minutes or so in mine, had I removed the wastegate pipe off the back. An ...

Thanks for the info! When you say all the exhaust, do you mean everything from the exhaust manifold back?

I dropped all the exhaust to remove mine this winter. I removed the wastegate with the p ...

I dropped all the exhaust to remove mine this winter. I removed the wastegate with the pipe that comes off the back end of it still attached, I was too lazy to separate them.

I'm pretty sure I'd u ...